General Information
Revision date
2014-06-01
Product name
Super Protector Paintable Rubberized Undercoat
Chemical name
Coating
1.2.1 Relevant identified uses
Underbody Coating, Automotive Use Prepared by Regulatory Department
Manufacturer Name
Dominion Sure Seal Group of Companies
Icons in SDS
Company Information
company name
Dominion Sure Seal Group of Companies
Section 2
Hazardous Ingredients
OSHA Hazardous CAS Wt. % TLV LD/50 mg/kg LC/50 mg/m3 Ingredients Number Route, Species Acetone 67-64-1 20 – 35 500 ppm 5250 to 8400 50,100 (rat,8h) (oral-various) >15,700 (dermal-rbt) Toluene 108-88-3 15 – 25 50 ppm 5,500; 7000 49,000 (rat, 4h) (oral-rat) 30,000 (2h) & 12,270 (dermal- 19,900 (7h), rbt) (mouse) Heptane 142-82-5 1 – 5 500 ppm Not Available 103,000(rat,4h) - 1 - BUR The other components of this product are not considered hazardous under applicable U.S. OSHA and/or Canadian WHMIS regulations. NON-Hazardous CAS Wt. % TLV LD/50 mg/kg LC/50 Ingredients Number Route, Species Carbon Black 1333-86-4 0.5-1.5 3.5 mg/m3 >8000 (oral-rat) Not Available 2. PHYSICAL AND CHEMICAL PROPERTIES Physical State Liquid
Appearance/Odor
Black Ketone Odour Threshold N/A Boiling Point (Deg.C) 56 (Acetone) Melting/Freezing Point (Deg. C) Not Available Vapour Density (Air = 1) > 1 Specific Gravity (Estimate) 1.10 Vapour Pressure (mm Hg) 24 kPa (Acetone) Evaporation Rate, n-Butyl Acetate = 1 > 1 pH Not Applicable Solubility in Water Partially Miscible 4. FIRE AND EXPLOSION HAZARD Flammability: Yes If Yes, Under Which Conditions: Excessive heat, sparks and open flame. Flammability Limits in Air (%): 2.5 – 12.8 Flash Point ( deg.C) -18 (Acetone; CC) Autoignition Temperature (Deg. C): Not available Hazardous Combustion Products: Carbon monoxide. Sensitivity to Mechanical Impact: Not available. Not expected to be sensitive to mechanical impact. Rate of Burning: Not available. Explosive Power: Not available. Sensitivity to Static Discharge: Not available. Expected to be sensitive to static discharge when vapours in air are between the flammability limits. Extinguishing Media: Carbon Dioxide, dry chemicals. In case of a large fire cool containers with water jet in order to prevent pressure build up, autoignition or explosion. - 2 - BUR 5. REACTIVITY DATA Chemical Stability: Yes, under normal conditions. Compatibility with Other Substances: No, with strong oxidizing agents. Hazardous Products of Decomposition: Carbon monoxide. Hazardous Polymerisation: Will not occur. 6. TOXICOLOGICAL PROPERTIES Route of Entry: Skin Contact: Yes Skin Absorption: Yes Eye Contact: Yes Inhalation: Yes Ingestion: Yes Effects of Exposure: Vapors are irritating to the eyes, nose, throat and respiratory tract. Prolonged exposure to high vapor concentrations may be harmful and cause adverse effects including labored breathing, dizziness, drowsiness, and headache. Eye contact may cause irritation. Skin contact may cause irritation. Prolonged contact may cause defatting of the skin resulting in irritation, itching, dryness and cracking of the skin. Prolonged and repeated skin contact may lead to dermatitis. Swallowing may cause burning of the mouth and stomach. Toluene is readily absorbed following ingestion producing symptoms similar to those described for inhalation. Carcinogenicity of material: Carbon black has been listed by IARC as group 2B – possibly carcinogenic to humans. Carbon black is not designated as a carcinogen by NTP, OSHA, ACGIH or the EU. Reproductive effects: Animal tests show that toluene possibly causes toxicity to human reproduction or development. Teratogenicity: No information is available and no adverse Teratogenic effects are anticipated. Mutagenicity: No information is available and no adverse Mutagenic effects are anticipated. Sensitization of the material: Material is not expected to be a skin or respiratory sensitizer. - 3 - BUR 7. PREVENTIVE MEASURES Eye Protection: Chemical safety goggles with side shields is the minimum requirement. Skin Protection: Wear chemical resistant gloves. Respiratory Protection: Wear a NIOSH/MSHA approved respirator if exposure exceeds occupational limits (see Section 2). Engineering Controls: Exhaust ventilation is recommended if used indoors on continuous basis. Leak/Spill Clean-Up Procedures: Ventilate enclosed spaces. Collect product for disposal. Do not use combustible materials such as sawdust as an absorbent. Eliminate all sources of ignition. Notify applicable government authority if release is reportable or could adversely affect the environment. Storage Instructions: Keep away from moisture, heat, sparks, and open flames.