Pull-A-Spout Oiler

Hazard statements (CLP)

H227, H305, H315, H316, H320

Code

Statements

H227

Combustible liquid

2.1 Classification of the substance or mixture

Skin Irritation Category 2 Eye Irritation Category 2B Carcinogen Category 2 Specific Target Organ Toxicity- Single Exposure Category 2 Specific Target Organ Toxicity- Repeat Exposure Category 2

Hazard statements

H227 Combustible liquid. H305 May be harmful if swallowed and enters airways. H316 Causes mild skin irritation. H320 Causes eye irritation. H315 Causes skin irritation.

Precautionary statements

P102 Keep out of reach of children. P103 Read label before use. P202 Do not handle until all safety precautions have been read and understood. P232 Protect from moisture. P233 Keep container tightly closed. P235 Keep cool. P260 Do not breathe vapours or spray. P262 Do not get in eyes, on skin, or on clothing. P264 Wash thoroughly after handling. P280 Wear protective gloves, and protective clothing. P285 In case of inadequate ventilation wear respiratory protection. SECTION 2. HAZARDOUS INGREDIENTS INFORMATION (cont.) P309 IF you feel unwell: Consult medical advice or attention P301 IF SWALLOWED: In general no treatment is necessary unless large quantities are swallowed, however, get medical advice. P302 IF ON SKIN: Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention. When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the effected person should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds P304 IF INHALED: No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice. P305 IF IN EYES: Flush eye with copious quantities of water. If persistent irritation occurs, obtain medical attention. P402 Store in a dry place. P403 Store in a well-ventilated place. P501 Material Disposal: Recover or recycle if possible. It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste collection and disposal methods in compliance with applicable regulations. Do not dispose into the environment, in drains or water courses. Container Disposal: Dispose in accordance with prevailing regulations, preferably to a recognized collector or contractor. The competence of the collector or contractor should be established beforehand. Local Legislation: Disposal should be in accordance with applicable regional, national, and local laws and regulations. NFPA/HMIS III Ratings Health 1 Flammability 1 Reactivity 0 Refer to NFPA 704 ‘Identification of the Fire Hazards of materials” for further information HMIS III® Health 1 Flamability 1

Physical hazards

0 Personal Protection B SECTION 3. HAZARDOUS INGREDIENTS INFORMATION INGREDIENT CAS No. EINECS No. % or Range GHS Classification Heavy Naphthenic 64742-44-5 265-146-1 94-100 H303: May be harmful Category 5 Clay Treated if swallowed Petroleum Distillates H315: Causes skin irri. Category 2 H320: Causes eye irri. Category 2B H333: May be harmful Category 5 If inhaled.