Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
40-<45% 25-<30%
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
10-<15%
EC/CAS
227-534-9/5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
5-<10%
EC/CAS
219-784-2/2530-83-8
Name of the chemical
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane
Concentration
1-<5%
EC/CAS
219-799-4/2536-05-2
Name of the chemical
2,2’-Methylenediphenyl diisocyanate
Concentration
<1%
General Information
Version
1,6 - Replaces version 1,5
Revision date
2025-05-23
Product name
DINITROL 840 A
1.2.1 Relevant identified uses
Adhesives, sealants, Curing agent
supplier name
Leading Solvent Supplies Limited
Manufacturer Name
DINOL GmbH
Emergency telephone
+49 30 30686 700
Icons in SDS
Company Information
company name
DINOL GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
msds@dinol.com, enquiries@leading-solvents.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
GB CLP Regulation Carc. 2; H351 Acute Tox. 4; H332 Skin Irrit. 2; H315 Eye Irrit. 2; H319 Resp. Sens. 1; H334 Skin Sens. 1; H317 STOT SE 3; H335 STOT RE 2; H373 Full text of hazard statements: see SECTION 16.
Hazard statements
see SECTION 16 H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. H317-H334-H351
2.2 Label elements
GB CLP Regulation
Hazardous Ingredients
Diphenylmethanediisocyanate, isomers and homologues MDI-based polyisocyanate prepolymer 4,4'-methylenediphenyl diisocyanate; diphenylmethane-4,4'-diisocyanate diphenylmethane-2,4'-diisocyanate 2,2'-methylenediphenyl diisocyanate; diphenylmethane-2,2'-diisocyanate
Signal word
Danger Danger
Precautionary statements
P260 Do not breathe dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P311 IF exposed or concerned: Call a POISON CENTER/doctor. P405 Store locked up. P280-P304+P340-P405
Special rules for supplemental label elements for certain mixtures
EUH204 Contains isocyanates. May produce an allergic reaction. Restricted to professional users. As from 24 August 2023 adequate training is required before industrial or professional use. Labelling of packages where the contents do not exceed 125 ml
Health hazards
Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
