Note: Ingredients listed on restricted chemical lists
EC/CAS
247-852-1/26628-22-8
Name of the chemical
Sodium Azide
Concentration
0.09%
General Information
Version
1.0
Revision date
2023-05-30
Product name
FA Mix
Icons in SDS
Company Information
company name
Devyser AB
e-mail address of the competent person responsible for the Safety Data Sheet
info@devyser.com
GHS Information
Signal word
Not applicable
Section 2
SECTION 2: Hazards identification
1272/2008 Classification of the substance or mixture
Hazard pictograms
Not applicable
Signal word
Not applicable
Hazard statements
Not applicable
2.3 Other hazards
This product does not contain any substances that are assessed to be a PBT or a vPvB The product does not contain any substances identified as having endocrine disruptive properties in accordance with the criteria set out in (EU) 2017/2100 or (EU) 2018/605.
2.1 Classification of the substance or mixture
Upon assessment, this mixture is not classified as hazardous according to 1272/2008 2.2. Label elements Hazard pictogram Not applicable Signal word Not applicable Hazard statement Not applicable 2.3. Other hazards This product does not contain any substances that are assessed to be a PBT or a vPvB The product does not contain any substances identified as having endocrine disruptive properties in accordance with the criteria set out in (EU) 2017/2100 or (EU) 2018/605. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.2. Mixtures Note that the table shows known hazards of the ingredients in pure form. These hazards are reduced or eliminated when mixed or diluted, see Section 16d. Constituent Classification Concentration SODIUM AZIDE CAS No: 26628-22-8 Acute Tox. 1, Acute Tox. 2, STOT RE 2, Aquatic Acute 1, 0.09 % EC No: 247-852-1 Aquatic Chronic 1; H310, H300, H373, EUH032, H400, H410 Index No: 011-004-00-7 REACH: 01-2119457019-37 Explanations to the classification and labelling of the ingredients are given in Section 16e. Official abbreviations are printed in normal font. Text in italics are specifications and/or complements used in the calculation of the classification of this mixture, see Section 16b. SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures Generally In case of concern, or if symptoms persist, call a doctor/physician. Never attempt to administer liquid, or anything else, to an unconscious person via the mouth. Upon breathing in Allow the injured person to rest in a warm place with fresh air, if symptoms persist seek medical attention. Upon eye contact Remove contact lenses immediately if possible. Rinse the eye for several minutes with lukewarm water. If irritation persists call a doctor. Upon skin contact Remove contaminated clothing. Wash the skin with soap and water. If symptoms occur, contact a physician. Upon ingestion Rinse nose, mouth and throat with water. Drink a couple of glasses of water immediately. Contact a doctor. 4.2. Most important symptoms and effects, both acute and delayed No further relevant information available. 4.3. Indication of any immediate medical attention and special treatment needed Symptomatic treatment. When contacting a physician, take this SDS with you. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Recommended extinguishing agents Extinguish with materials intended for the surrounding fire. Unsuitable extinguishing agents Among common extinguishing agents there are none that are overtly unsuitable. 5.2. Special hazards arising from the substance or mixture Produces fumes containing harmful gases (carbon monoxide and carbon dioxide) when burning, and, in case of incomplete combustion, aldehydes and other toxic, harmful, irritant or environmentally harmful substances. Note that the extinguishing water may contain toxic substances or other hazardous substances. 5.3. Advice for firefighters Protective measures to be taken with regard to other materials at the scene of the fire . In case of fire use proper breathing apparatus. Wear full protective clothing. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Use recommended safety equipment, see section 8. Do not inhale vapours and avoid contact with skin, eyes and clothes when cleaning up the spillage. Ensure good ventilation. 6.2. Environmental precautions Avoid discharge into soil, water or sewers. 6.3. Methods and material for containment and cleaning up Small spills can be wiped up with a cloth or similar. Then flush the spill site with water. Larger spills should first be covered with sand or earth and then be collected. Collected material should be disposed according to Section 13. 6.4. Reference to other sections See section 8 and 13 for personal protection equipment and disposal considerations. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Take the necessary preventive and protective measures for safe handling. Store this product separately from food items and keep it out of the reach of children and pets. Avoid spillage and contact with eyes and skin. Do not eat, drink or smoke in premises where this product is handled. Take off work clothes and protective gear before meals. Wash your hands after using the product. Remove contaminated clothing. Wash contaminated clothing before reuse. Use recommended safety equipment, see section 8. Keep away from incompatible products. Implement appropriate engineering controls if necessary, see Section 8. 7.2. Conditions for safe storage, including any incompatibilities Take the necessary preventive and protective measures for safe storage. The product should be stored in a manner which prevents hazards to health and the environment. Avoid exposure to humans and animals and do not discharge the product in a sensitive environment. To be stored away from food and animal fodder and away from devices or surfaces that are in contact with those items. Always use sealed and visibly labeled packages. Store in a well-ventilated space. Do not store close to incompatible materials (see section 10.5). 7.3. Specific end use(s) See identified uses in Section 1.2. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters 8.1.1. National limit values SODIUM AZIDE United Kingdom (EH40/2005) Time-weighted-average exposure limit (TWA) 0.1 mg/m³ Short term exposure limit (STEL) 0.3 mg/m³ Note Sk Explanations of abbreviations are given in Section 16b DNEL No data available. PNEC No data available. 8.2. Exposure controls The risks posed by the product or its constituents must be considered in the task specific risk assessment, in accordance with current working environment legislation. The risk assessment should be reviewed regularly and updated if necessary. 8.2.1. Appropriate engineering controls The ventilation in the workplace must ensure an air quality that meets the requirements of the current working environment legislation. Local exhaust ventilation should be used to remove airborne contaminants at the source. Eye/face protection Eye protection should be worn if there is any danger of direct exposure or splashing. Skin protection Use suitable protective clothing. Protective gloves are normally not needed due to the properties of this product, but may be necessary for other reasons, e.g. mechanical risks, temperature conditions or microbiological risks. The most suitable protective glove should be chosen in consultation with the glove supplier, taking into account the risk assessment for the specific task and the properties of the chemicals involved. Note that the breakthrough time of the material is affected by the duration of the exposure, temperature conditions, abrasion, etcetera. Based on the chemical properties of the product, the following glove materials are recommended (EN 374):. – Nitrile rubber. Respiratory protection Respiratory protective equipment is not normally required when working with this product, given that adequate ventilation is provided. The most appropriate respiratory protective equipment should be decided in consultation with the appointed safety representative, taking into account the risk assessment for the specific task. Based on the physical and chemical properties of the product, the following filter type(s) and/or filter combination(s) are recommended:. – A/P2. 8.2.3. Environmental exposure controls For limitation of environmental exposure, see Section 12. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties (a) Physical state liquid Form: liquid (b) Colour varying (c) Odour Not indicated (d) Melting point/freezing point Not indicated (e) Boiling point or initial boiling point and boiling range Not indicated (f) Flammability Not indicated (g) Lower and upper explosion limit Not indicated (h) Flash point Not indicated (i) Auto-ignition temperature Not indicated (j) Decomposition temperature Not indicated (k) pH When supplied, pH is: 7 - 9 (l) Kinematic viscosity Not indicated (m) Solubility Solubility in water: Soluble (n) Partition coefficient n-octanol/water (log value) Not indicated (o) Vapour pressure Not indicated (p) Density and/or relative density Not indicated (q) Relative vapour density Not indicated (r) Particle characteristics Not indicated 9.2. Other information 9.2.1. Information with regard to physical hazard classes Not indicated 9.2.2. Other safety characteristics Not indicated SECTION 10: STABILITY AND REACTIVITY 10.1. Reactivity The product contains no substances which can lead to hazardous reactions at normal use. 10.2. Chemical stability The product is stable at normal storage and handling conditions. 10.3. Possibility of hazardous reactions No hazardous reactions known. 10.4. Conditions to avoid Avoid frost. 10.5. Incompatible materials Avoid contact with strong acids and oxidizers. 10.6. Hazardous decomposition products None under normal conditions. SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on hazard classes as defined in Regulation (EC) No 1272/2008 Information on possible health hazards are based on experience and / or toxicological properties of several components in the product. Acute toxicity The product is not classified as acutely toxic. SODIUM AZIDE LD50 rabbit 24h: 20 mg/kg Dermally LD50 rat 24h: 10 mg/kg Orally Skin corrosion/irritation The product is not classified for skin corrosion/irritation. Serious eye damage/irritation The product is not classified for serious eye damage/eye irritation. Respiratory or skin sensitisation The product is not classified as sensitising. Germ cell mutagenicity The product is not classified as mutagen. Carcinogenicity The product is not classified as carcinogenic. Reproductive toxicity The product is not classified as a reproductive toxicant. STOT-single exposure The product is not classified for specific organ toxicity after single exposure. STOT-repeated exposure The product is not classified for specific organ toxicity after repeated exposure. Aspiration hazard The product is not classified as being toxic for aspiration. 11.2. Information on other hazards 11.2.1. Endocrine disrupting properties The product does not contain any substances identified as having endocrine disruptive properties in accordance with the criteria set out in (EU) 2017/2100 or (EU) 2018/605. 11.2.2. Other information Not indicated. SECTION 12: ECOLOGICAL INFORMATION 12.1. Toxicity The product is not to be labelled as a environmental hazard. However, it is not inconceivable that large emissions, or repeated small emissions, can have a harmful effect on the environment. Prevent release on land, in water and drains. 12.2. Persistence and degradability There is no information regarding persistence or degradability. 12.3. Bioaccumulative potential There is no information regarding bioaccumulation. 12.4. Mobility in soil Information about mobility in nature is not available. 12.5. Results of PBT and vPvB assessment This product does not contain any substances that are assessed to be a PBT or a vPvB. 12.6. Endocrine disrupting properties The product does not contain any substances identified as having endocrine disruptive properties in accordance with the criteria set out in (EU) 2017/2100 or (EU) 2018/605. 12.7. Other adverse effects No known effects or hazards. SECTION 13: DISPOSAL CONSIDERATIONS 13.1. Waste treatment methods Waste handling of the product The product is not classified as hazardous waste. Empty, rinsed packaging is sent for recycling where practicable. Avoid discharge into sewers. See directive 2008/98/EC on waste. Observe national or regional provisions on waste management. SECTION 14: TRANSPORT INFORMATION Where not otherwise stated the information applies to all of the UN Model Regulations, i.e. ADR (road), RID (railway), ADN (inland waterways), IMDG (sea), and ICAO (IATA) (air). 14.1. UN number or ID number Not classified as dangerous goods 14.2. UN proper shipping name Not applicable 14.3. Transport hazard class(es) Not applicable 14.4. Packing group Not applicable 14.5. Environmental hazards Not applicable 14.6. Special precautions for user Not applicable 14.7. Maritime transport in bulk according to IMO instruments Not applicable 14.8 Other transport information Not applicable SECTION 15: REGULATORY INFORMATION 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Not indicated. 15.2. Chemical safety assessment Assessment and chemical safety report in accordance with 1907/2006 Annex I has not yet been performed. SECTION 16: OTHER INFORMATION 16a. Indication of where changes have been made to the previous version of the safety data sheet Revisions of this document This is the first version 16b. Legend to abbreviations and acronyms used in the safety data sheet Full texts for Hazard Class and Category Code mentioned in section 3 Acute Tox. 1 Acute toxicity (dermal), Hazard Category 1 - Acute Tox. 1, H310 - Fatal in contact with skin Acute Tox. 2 Acute toxicity (oral), Hazard Category 2 - Acute Tox. 2, H300 - Fatal if swallowed STOT RE 2 Specific target organ toxicity — Repeated exposure, Hazard Category 2 - STOT RE 2, H373 - May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard> Aquatic Acute 1 Hazardous to the aquatic environment — Acute Hazard, Category 1 - Aquatic Acute 1, H400 - Very toxic to aquatic life Aquatic Chronic 1 Hazardous to the aquatic environment — Chronic Hazard, Category 1 - Aquatic Chronic 1, H410 - Very toxic to aquatic life with long lasting effects Explanations of the abbreviations in Section 8 United Kingdom Sk Can be absorbed through the skin. The assigned substances are those for which there are concerns that dermal absorption will lead to systemic toxicity Explanations of the abbreviations in Section 14 ADR European Agreement concerning the International Transport of Dangerous Goods by Road RID Regulations concerning the International Transport of Dangerous Goods by Rail IMDG International Maritime Dangerous Goods Code ICAO International Civil Aviation Organization (ICAO, 999 University Street, Montreal, Quebec H3C 5H7, Canada) IATA The International Air Transport Association 16c. Key literature references and sources for data Sources for data Primary data for the calculation of the hazards has preferentially been taken from the official European classification list, 1272/2008 Annex I , as updated to 2023-05-30. Where such data was not available, alternative documentation used to establish the official classification was used, e.g. IUCLID (International Uniform Chemical Information Database). As a second alternative, information was used from reputable international chemical industries, and as a third alternative other available information was used, e.g. material safety data sheets from other suppliers or information from non-profit associations, where reliability of the source was assessed by expert opinion. If, in spite of this, reliable information could not be sourced, the hazards were assessed by expert opinions based on the known hazards of similar substances, and according to the principles in 1907/2006 and 1272/2008. Full texts for Regulations mentioned in this Safety Data Sheet 1907/2006 REGULATION (EC) No 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC 1272/2008 REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 2008/98/EC DIRECTIVE 2008/98/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 November 2008 on waste and repealing certain Directives 16d. Methods of evaluating information referred to in 1272/2008 Article 9 which was used for the purpose of classification Hazard calculation for this mixture has been performed as a cumulative assessment with the aid of expert assessments in accordance with 1272/2008 Annex I , where all available information which may be significant to establishing the hazards of the mixture was assessed together, and in accordance with 1907/2006 Annex XI . 16e. List of relevant hazard statements and/or precautionary statements Full texts for hazard statements mentioned in section 3 H310 Fatal in contact with skin H300 Fatal if swallowed H373 May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard> EUH032 Contact with acids liberates very toxic gas H400 Very toxic to aquatic life H410 Very toxic to aquatic life with long lasting effects 16f. Advice on any training appropriate for workers to ensure protection of human health and the environment Warning for misuse Not indicated. Other relevant information Not indicated Editorial information This material safety data sheet has been prepared and checked by KemRisk®, KemRisk Sweden AB, Platensgatan 8, SE-582 20 Linköping, Sweden, www.kemrisk.se Safety Data Sheet for FA Mix. Page 8 of 8 SDS-ID: 63176 Powered by TCPDF (www.tcpdf.org) SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Trade name FA Activator Article number see cover page 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Laboratory chemicals 1.3. Details of the supplier of the safety data sheet Company Devyser AB Instrumentvägen 19 126 53 Hägersten Sweden Telephone 08-562 158 50 E-mail