Reztore Topical Antistat

Desco Industries, Inc

Revision date : 2017-06-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 3
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

111-76-2

Name of the chemical

Ethylene glycol monobutyl ether (EGBE)

Concentration

5-25%

General Information

Revision date

2017-06-08

Product name

Reztore Topical Antistat

CAS No.

111-76-2

1.2.1 Relevant identified uses

Antistat coating

Manufacturer Name

Desco Industries, Inc

Icons in SDS

GHS07

Company Information

company name

Desco Industries, Inc

e-mail address of the competent person responsible for the Safety Data Sheet

Service@DescoIndustries.com

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H302, H312, H315, H319, H332

Hazard statements

Code

Statements

H302

Harmful if swallowed

Section 2

SECTION 2: Hazards identification

Classification of substance or mixture Acute Toxicity (Oral) Category 4 Acute Toxicity (Dermal) Acute Toxicity (Inhalation: Vapors) Skin Corrosion/irritation Serious eye damage/eye irritation Category 4 Category 2

Hazard pictograms

Exclamation mark

Signal word

Warning

Hazard statements

(H302): Harmful if swallowed. (H312): Harmful in contact with skin (H315): Causes skin irritation. (H319): Causes serious eye irritation. (H332): Harmful if inhaled.

Precautionary statements

(P261): Avoid breathing dust/fume/gas/mist/vapours/spray. (P264): Wash hands thoroughly after handling. (P270): Do not eat, drink or smoke when using this product. (P271): Use only outdoors or in a well-ventilated area. (P280): Wear protective gloves/protective clothing/eye protection/face protection. P301 + P312 + P330) IF SWALLOWED Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P302 + P352) IF ON SKIN Wash with plenty of water (P362 + P364): Take off contaminated clothing and wash it before reuse. P332 + P313) If skin irritation occurs Get medical advice/attention P304+P340+P312) IF INHALED Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. P305 + P350 + P338) IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P337 + P313) If eye irritation persists Get medical advice/attention (P501): Dispose of contents/container in compliance with all Federal, National and Local laws and regulations.

2.3 Other hazards

N/A

2.1 Classification of the substance or mixture

Acute Toxicity (Oral) Category 4 Acute Toxicity (Dermal) Category 4 Acute Toxicity (Inhalation: Vapors) Category 4 Skin Corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2 2.2 Label elements Symbol: Exclamation mark Signal word: Warning Hazard statements: (H302): Harmful if swallowed. (H312): Harmful in contact with skin (H315): Causes skin irritation. (H319): Causes serious eye irritation. (H332): Harmful if inhaled. Precautionary statements: (P261): Avoid breathing dust/fume/gas/mist/vapours/spray. (P264): Wash hands thoroughly after handling. (P270): Do not eat, drink or smoke when using this product. (P271): Use only outdoors or in a well-ventilated area. (P280): Wear protective gloves/protective clothing/eye protection/face protection. (P301 + P312 + P330): IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. (P302 + P352): IF ON SKIN: Wash with plenty of water. (P362 + P364): Take off contaminated clothing and wash it before reuse. (P332 + P313): If skin irritation occurs: Get medical advice/attention. (P304+P340+P312): IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. (P305 + P350 + P338): IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. (P337 + P313):If eye irritation persists: Get medical advice/attention. (P501): Dispose of contents/container in compliance with all Federal, National and Local laws and regulations. 2.3 Other hazards N/A SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS 3.2 Mixture Hazardous Ingredients CAS No. Weight % Ethylene glycol monobutyl ether 111-76-2 5-25% SECTION 4 — FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Flush with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin Contact Wash with soap and water. If skin irritation occurs: Get medical advice/ attention. Ingestion DO NOT induce vomiting, may cause damage to mouth, throat, or esophagus. Rinse mouth. Contact a physician. Inhalation Move subject to fresh air and keep at rest in a position comfortable for breathing 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5 — FIRE FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media The product is not flammable. Extinguish fire using media suitable for surrounding fire. Unsuitable Extinguishing Methods N/A 5.2 Special hazards arising from the substance or mixture No further relevant information available. 5.3 Advice for firefighters Move containers from fire area if it can be done without risk. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk. In the event of fire wear self-contained breathing apparatus (SCBA). SECTION 6 — ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures Wearing protective clothing, eye protection, and, inhalation protection. 6.2 Environmental precautions Keep spills and cleaning runoffs out of municipal sewers and open bodies of water. 6.3 Methods and materials for containment and cleaning up Soak up with sawdust, sand, or other absorbent material. Shovel or sweep up. Flush spill area with water. 6.4 Reference to other sections See SECTION 13, Disposal Considerations, for information regarding the disposal of contained spills. If Material is Released/Spilled: mop up immediately. Wet floor may present slip hazard. SECTION 7 — HANDLING AND STORAGE 7.1 Precautions for safe handling Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing. For commercial and industrial use only. 7.2 Conditions for safe storage, including any incompatibilities Storage temperature: Max. 49°C/120°F 1°C/34°F. Keep from freezing. Ensure the storage area is well ventilated. 7.3 Specific end uses N/A SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION 8.1 Control parameters TLV-valve 20 ppm maximum for Ethylene Glycol Monobutyl and Dioxane. Hazardous Ingredients CAS No. TLV-value OSHA PEL Ethylene glycol monobutyl ether 111-76-2 20 ppm 50 ppm or 240 mg/m3 8.2 Exposure controls Ventilation Provide general clean air dilution or local exhaust ventilation in volume and pattern to prevent air contaminant concentration build-up. Individual protection measures Respiratory Protection Wear MSHA/NIOSH approved respirator where exposure limits are exceeded. Protective Gloves If there is potential for prolonged or repeated skin contact, wear plastic gloves for the duration of anticipated exposure. Eye protection Avoid contact with eyes. Use safety eye wear with splash guards or side shields. Other Protective Equipment None normally required. If unable to avoid prolonged or repeated contact with skin, wear protective clothing. Work/Hygienic Practices Wash hands before eating, smoking, or using washroom facilities. SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance: Liquid Color: Clear Odor: N/A Odor Threshold: N/A pH: 6.5-7.5 Melting Point: N/A. Boiling Point: >200°F (93.3°C) Flash Point: Noncombustible Evaporation rate: N/A Flammability

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.