Charge-Guard Surface and Mat Cleaner

Hazard statements (CLP)

H226, H320

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

Flammable liquid Eye irritation Category 3 Category 2A-2B

Hazard pictograms

Flame, Exclamation mark.

Signal word

Warning.

Hazard statements

Flammable liquid and vapour. Causes eye irritation.

Precautionary statements

IF SWALLOWED: Immediately call a POISION CENTER or doctor/physician. DO NOT induce vomiting. Store in a well-ventilated place. Keep cool. Do not eat, drink or smoke when using this product. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

2.1 Classification of the substance or mixture

Flammable liquid Category 3 Eye irritation Category 2A-2B Labelling: Symbol: Flame, Exclamation mark. Signal word: Warning. Hazard statement: Flammable liquid and vapour. Causes eye irritation. Precautionary statements: IF SWALLOWED: Immediately call a POISION CENTER or doctor/physician. DO NOT induce vomiting. Store in a well-ventilated place. Keep cool. Do not eat, drink or smoke when using this product. Keep away from heat/sparks/open flames/hot surfaces. No smoking. SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Ingredients: CAS No. Weight (%) Isopropanol* 67-63-0 5-25% SECTION 4 — FIRST AID MEASURES Eye Contact: Flush with water for at least 15 minutes. Skin Contact: Wash with soap and water. Ingestion: DO NOT induce vomiting. Contact a physician. Inhalation: Move subject to fresh air. SECTION 5 — FIREFIGHTING MEASURES Proper Extinguishing Media: Water. Unsuitable Extinguishing Methods: N/A. Protective Equipment & Precautions: Wearing of appropriate protective equipment and clothing. Special Fire Fighting Procedures: Cool containers with water. Unusual Fire and Explosion Hazards: None known. SECTION 6 — ACCIDENTAL RELEASE MEASURES Personal Precautions: Wearing protective clothing. Inhalation protection. Extinguish all ignition sources. Environmental Precautions: Biodegradable. Cleaning Procedures: Contain and collect material into plastic container. Water rinse and drain, flush small amounts. Use sanitary landfill disposal. Follow state and local regulations (RCRA; Subtitle D). SECTION 7 — HANDLING AND STORAGE Handling: Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing. Storage: Storage temperature: Max. 49°C/120°F 1°C/34°F Keep from freezing SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION Hazardous Ingredients: CAS No. TLV-value Isopropanol* 67-63-0 400 ppm Exposure controls Control Parameters: TLV-value 400 ppm maximum for Isopropanol. Measures for Technical Control: Preferences of technical measure to prevent or control contact with the product. Isolating process and personnel, mechanical ventilation (dilution and local exhaust) and the regulation of process conditions. In case of non-prevention or non-control, a proper protective wearing should be used. Personal protective equipment (PPE) Respiratory Protection (Specify Type): Wear MSHA/NIOSH approved respirator where exposure limits are exceeded. Hand Protection: Impervious/Neoprene Gloves. Eye Protection: Safety glasses or Chemical splash goggles as defined in ANSI Z-87.1 or a similar standard. Work/Hygienic Practices: Wash hands before eating, smoking, or using washroom facilities. SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES Form: Liquid. Color: Clear violet. Odor: Floral Alcohol. Boiling Point: >200°F (93.3°C) Melting Point: N/A. Specific Gravity (H2O = 1): 0.98 Solubility in Water: Complete. pH: 6-8 VOC per Method 24 of EPA: 1% VOC by wt. Flash Point: 106°F (41°C) Flammability Limits: N/A. (vol. % in air) Vapor Pressure (mm Hg): 18.0 Vapor Density (air=1): 1.06 Density at 20°C: 8.17 lbs. /gal Flammability: Classification according to NFPA and OSHA as “non-flammable”. Flammable Category 3 according to EU and GHS. Ignition Temperature: N/A. Evaporation Rate: 0.28 SECTION 10 — STABILITY AND REACTIVITY Hazardous Decomposition/Byproducts: Thermal decomposition may yield carbon monoxide. Incompatibility (Materials to Avoid): Strong Oxidizers. Stability/Reactivity: Stable product at normal conditions.