Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
N/A
General Information
Revision date
2019-09-18
Product name
A-PMDI
Chemical name
Diphenylmethane Diisocyanate (MDI)
Icons in SDS
Company Information
company name
Demilec
e-mail address of the competent person responsible for the Safety Data Sheet
Info@Demilec.com, Info@Demilec.com
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) Physical State / Color / Odor Liquid / Brown / Slightly musty EMERGENCY OVERVIEW / WARNING OSHA / HCS Status This material is classified hazardous under OSHA Hazard Communication Standard (29 CFR 1910.1200). Toxic vapors may be released during burning or thermal decomposition. Closed container may forcibly
Other physicochemical hazards
rupture under extreme heat or when contents have been contaminated with water. Use cold water spray to cool fire exposed containers to minimize the risk of rupture. Harmful by inhalation. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation and skin contact. This product is respiratory irritant and potential respiratory sensitizer:
Health hazards
repeated inhalation of vapor or aerosol at levels above the occupational exposure limit could cause respiratory sensitization. A hyper reactive response to even minimal concentrations of MDI may develop in sensitized persons. The onset of the respiratory symptoms may be delayed for several hours after exposure. Lung damage and respiratory sensitization may be permanent.
