Note: Ingredients listed on restricted chemical lists
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
N/A
General Information
Revision date
2017-11-13
Product name
Selectaplus CE Liquid
CAS No.
80-62-6
REACH No
if
1.2.1 Relevant identified uses
For dental use only
Emergency telephone
+49 (0)6181/59-50 (This telephone number is available during office hours only.
Icons in SDS
Company Information
company name
DeguDent GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
SDB.Degudent-DE@dentsplysirona.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H317, H335
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flammable liquids Category 2 H225 Skin corrosion/irritation Category 2 H315 Skin Sensitisation Category 1 H317 Specific Target Organ Toxicity - Single exposure Category 3 H335 (inhalation)
2.2 Label elements
Labelling as per (EU) 1272/2008 Statutory basis EU-CLP as per Regulation (EU) No. 1272/2008, Annex VI hazard-defining component(s) (GHS) methyl methacrylate
Hazard pictograms
VA-Nr 01779097 replaces version: 3.9 Page:
Signal word
Danger
Hazard statements
H225 - Highly flammable liquid and vapour. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H335 - May cause respiratory irritation.
Precautionary statements
P280 - Wear protective gloves/ eye protection/ face protection. P403 + P233 - Store in a well-ventilated place. Keep container tightly closed. P501 - Dispose of contents/container in accordance with local regulation.
Prevention
P260 - Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
2.3 Other hazards
When heated, formation of explosive vapour/air mixtures., Danger of bursting of closed systems to vigorous exothermic polymerization. Avoid uncontrolled polymerization. A PBT/vPvB evaluation is not available, since a chemical safety evaluation is not required / has not been carried out.
