General Information
Revision date
2023-08-18
Product name
NOX‐RUST X128
Product Synonyms
None
Chemical name
Mixture
1.2.2. Uses advised against
Uses other than those described above
Icons in SDS
Company Information
company name
Chicago, IL 60638
e-mail address of the competent person responsible for the Safety Data Sheet
SDS@Daubert.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
Hazard pictograms
GHS Classification Flammable Liquid Category 3; Specific Target Organ Systemic Toxicity STOT) ‐ Single Exposure Category 3
Signal word
Warning Hazard Statements Flammable liquid and vapor May cause respiratory irritation Unclassified Hazards (HNOC) None Identified
Prevention
Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Ground/bond container and receiving equipment. Use explosion‐proof electrical/ventilating/lighting equipment. Use only non‐sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/ vapors/spray. Use only outdoors or in a well‐ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Response
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you feel unwell. In case of fire: Use appropriate media to extinguish.
Storage
Store in a well‐ventilated place. Keep container tightly closed. Store in a well‐ventilated place. Keep cool. Store locked up.
Disposal
Dispose of contents/container to a suitable disposal site in accordance with local/national/international regulations.
2.3 Other hazards
Carbon black, when present in paint, grease or a liquid coating is not known to present a carcinogen hazard as it is bound within a matrix. Risks associated with this chemical is attributable to dust (inhalation) exposures, and not to exposures from formulated products, like paint, grease, or a liquid coating, where the dust is embedded in the mixture and not available for exposure. Particles released from sanding and sawing mixtures, including paints, lacquers, and epoxy solids containing carbon black, have been characterized. Pure chemical particles are not released during these uses, but rather the particles remain embedded in the coating matrices.
2.1 Classification of the substance or mixture
Hazard Statements: Flammable liquid and vapor May cause respiratory irritation Unclassified Hazards (HNOC): None Identified Precautionary Statements: Prevention