Touch N Foam No Warp Window & Door

DAP Canada

Revision date : 2023-06-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS04 GHS07 GHS02
Health risk rating 3
Safety risk rating 4
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

26447-40-5

Name of the chemical

Methylenediphenyl diisocyanate (see also specific isomers)

Concentration

10-30

EC/CAS

13674-84-5

Name of the chemical

Tris(2-chloro-1-methylethyl) phosphate

Concentration

10-30

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

7-13

EC/CAS

75-28-5

Name of the chemical

iso-Butan, enthält  0,1% Butadien

Concentration

1-5

General Information

Revision date

2023-06-01

Product name

Touch N Foam No Warp Window & Door

1.2.1 Relevant identified uses

Foam Sealant/Adhesive 475 Finchdene Square Unit 5 4701765 Scarborough, Ontario M1X 1B7

Emergency telephone

1-800-535-5053, 1-352-323-3500

Icons in SDS

GHS02 GHS04 GHS07 M004 M010

Company Information

company name

DAP Canada

e-mail address of the competent person responsible for the Safety Data Sheet

MSDS@dap.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H222, H280, H332

Hazard statements

Code

Statements

H222

Extremely flammable aerosol

Section 2

SECTION 2: Hazards identification

EMERGENCY OVERVIEW: Contents under pressure. Do not puncture can. Exposure to temperatures above 120 'F may cause can to rupture. The primary adverse health effects of this product are related to the Polymeric Isocyanate (MDI) component. Therefore, adequate ventilation should be provided to avoid exceeding the exposure limits of these components (See Section 8). MDI vapor can irritate the respiratory tract causing runny nose, sore throat, coughing and reduce lung function. GHS Classification Fl Aer, 1, Gas under Pressure, Comp. Gas Symbol(s) of Product Signal Word Danger Possible Hazards 47% of the mixture consists of ingredients of unknown acute toxicity

Hazard statements

Flammable Aerosol, category 1 Compressed Gas Acute Toxicity, Inhalation, category 4 H222 Extremely flammable aerosol. H280 Contains gas under pressure; may explode if heated. H332 Harmful if inhaled.

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P410+P403 Protect from sunlight. Store in a well-ventilated place. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.

2.1 Classification of the substance or mixture

Fl Aer, 1, Gas under Pressure, Comp. Gas Symbol(s) of Product Signal Word Danger Possible Hazards 47% of the mixture consists of ingredients of unknown acute toxicity GHS HAZARD STATEMENTS Flammable Aerosol, category 1 H222 Extremely flammable aerosol. Compressed Gas H280 Contains gas under pressure; may explode if heated. Acute Toxicity, Inhalation, category 4 H332

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.