Premium Polyurethane Construction Adhesive

DAP Canada

Revision date : 2024-03-29

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08 GHS07
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

80-100

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

1-5

Listed in

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

0.5-1.5

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

0.1-1.0

Listed in

General Information

Revision date

2024-03-29

Product name

Premium Polyurethane Construction Adhesive

1.2.1 Relevant identified uses

Caulking Compound 475 Finchdene Square Unit 5 7735366 Scarborough, Ontario M1X 1B7

Emergency telephone

1-800-535-5053, 1-352-323-3500

Icons in SDS

GHS07 GHS08 M004 M010

Company Information

company name

DAP Canada

e-mail address of the competent person responsible for the Safety Data Sheet

MSDS@dap.com

GHS Information

Signal word

Danger

Section 2

SECTION 2: Hazards identification

EMERGENCY OVERVIEW: May cause nausea, headaches, and dizziness. May cause eye, skin and respiratory tract irritation. Use only with adequate ventilation. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. May cause sensitization by inhalation and skin contact. The primary adverse health effects of this product are related to the Polymeric Isocyanate (MDI) component. Therefore, adequate ventilation should be provided to avoid exceeding the exposure limits of these components (See Section 8). The likelihood of exceeding these limits are low due to the low concentration of vapor produced during normal use. However, if used indoors, mechanical ventilation or exhaust should be provided during use and until product is cured. This product has strong adhesive-like characteristics and will adhere aggressively to skin and other surfaces. If accidental contact occurs, follow the appropriate first-aid procedure described in Section 4 of this MSDS.

2.1 Classification of the substance or mixture

Acute Tox. 2 Inhalation, Carc. 2 Symbol(s) of Product Signal Word Danger GHS HAZARD STATEMENTS Acute Toxicity, Inhalation, category 4 H332 Harmful if inhaled. Carcinogenicity, category 2 H351 Suspected of causing cancer.

Signal word

Danger

Hazard statements

Acute Toxicity, Inhalation, category 4 Carcinogenicity, category 2 H332 Harmful if inhaled. H351 Suspected of causing cancer.

Precautionary statements

P201 Obtain special instructions before use. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P281 Use personal protective equipment as required. P284 [In case of inadequate ventilation] wear respiratory protection. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313 IF exposed or concerned: Get medical advice/attention. P310 Immediately call a POISON CENTER or doctor/physician. P320 Specific treatment is urgent (see … on this label). P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.