Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
40-<60%
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
5-<10%
EC/CAS
203-473-3/107-21-1
Name of the chemical
Ethane-1,2-diol
Concentration
1-<2,5%
General Information
Version
04/01/2023
Revision date
2022-12-14
Product name
2C Polyurethane Foam 596
1.2.1 Relevant identified uses
2-component PU foam For professionel and industriel use only. Not recommended for DIY-use
Icons in SDS
Company Information
company name
Dana Lim A/S
e-mail address of the competent person responsible for the Safety Data Sheet
info@danalim.dk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H334, H335, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Aerosol 1; H222, H229, Extremely flammable aerosol. Pressurised container: May burst if heated. Skin Irrit. 2; H315, Causes skin irritation. Skin Sens. 1; H317, May cause an allergic skin reaction. Eye Irrit. 2; H319, Causes serious eye irritation. Resp. Sens. 1; H334, May cause allergy or asthma symptoms or breathing difficulties if inhaled. STOT SE 3; H335, May cause respiratory irritation. Carc. 2; H351, Suspected of causing cancer. STOT RE 2; H373, May cause damage to organs through prolonged or repeated exposure.
Signal word
Danger
Hazard statements
Extremely flammable aerosol. Pressurised container: May burst if heated. (H222, H229) Causes skin irritation. (H315) May cause an allergic skin reaction. (H317) Causes serious eye irritation. (H319) May cause allergy or asthma symptoms or breathing difficulties if inhaled. (H334) May cause respiratory irritation. (H335) Suspected of causing cancer. (H351) May cause damage to organs through prolonged or repeated exposure. (H373)
Precautionary statements
General -
Prevention
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. (P210) Do not spray on an open flame or other ignition source. (P211) Do not pierce or burn, even after use. (P251) Use only outdoors or in a well-ventilated area. (P271) Wear eye protection/protective gloves/protective clothing. (P280)
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. (P304+P340) IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (P305+P351+P338)
Storage
Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F. (P410+P412)
Disposal
Dispose of contents/container in accordance with local regulation. (P501)
Hazardous Ingredients
Diphenyl methane diisocyanate, isomers and homologues
Additional information
EUH204, Contains isocyanates. May produce an allergic reaction. As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Additional warnings In the event of leaks, high concentrations of gases can quickly form. They can be toxic, asphyxiating, or explosive. This mixture/product does not contain any substances considered to meet the criteria classifying them as PBT and/or vPvB. This product does not contain any substances considered to be endocrine disruptors in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605.
