Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
7-10
EC/CAS
238-877-9/14807-96-6
Name of the chemical
Talc
Concentration
0-40
EC/CAS
37244-96-5
Name of the chemical
nepheline syenite
Concentration
11-12
EC/CAS
215-479-3/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
11-13
General Information
Revision date
2022-11-23
Product name
Unglazed Ceramic Bisque Tile
Product Synonyms
Unglazed Ceramic Bisque Tile (For purposes of this SDS, the term “ceramic” encompasses all types of tile products manufactured/sourced by Dal-Tile Corporation.)
1.2.1 Relevant identified uses
Unglazed Ceramic Tile products manufactured/sourced by Dal-Tile Corporation can be glazed and refired and modified accordingly to market demands. Should you desire additional information, please direct your inquiry to the address above This document has been prepared in accordance with the Occupational Safety and Health Administration (OSHA) Hazard Communication standard, 29 Code of Federal Regulations (CFR) 1910.1200(g), Safety Data Sheets
Manufacturer Name
Dal-Tile Corporation
Icons in SDS
Company Information
company name
Dal-Tile Corporation
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H335, H350, H372
Hazard statements
Code
Statements
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
GHS Classification Unglazed Ceramic Tile products are mixtures of predominantly clays, silica sand, and other natural occurring minerals that have been mixed with water and fired in a high temperature kiln. The finished, fired tiles are odorless, stable, non-flammable, and pose no immediate hazard to health. Respiratory, hand and eye protection may be needed to prevent excess exposure to airborne particulates if dust is produced by cutting Bisque tiles or if dust is produced by any other operations, from crushing glazing and/or disposal projects. Emergency Overview: Danger! Lung injury and Cancer Hazard GHS Classification (Global Harmonized Standard Classification) Carcinogenicity Category 1A (H350) Specific target organ toxicity, single exposure; Respiratory tract irritation - Category 3 (H335) Specific target organ toxicity, repeated exposure - Category 1A (H372) GHS Label, Hazards and Precautionary Statements
Hazard pictograms
Crystalline Silica: Category 3 (Respiratory tract irritation) (H335) Categories 1A(Carcinogenicity)(H372) Label Signal Word: Danger
Hazard statements
(H350) May cause CANCER (inhalation) (H335) May cause respiratory irritation (H372) Causes damage to organs (lung/respiratory) through prolonged or repeated exposure (inhalation) Page 2 of 6 2. HAZARDS IDENTIFICATION (CONT)
Precautionary statements
Do not handle until all safety precautions have been read and understood. (P202) Do not breathe dust/spray. (P260 + P261) Wash skin thoroughly after handling. (P264) Do not eat, drink or smoke when using this product. (P270) Wear protective gloves, protective clothing, eye protection, face protection. (P280)
Potential health effects
Inhalation: Do not breathe dust. See “Health Hazards” in Section 11 for more details.
2.1 Classification of the substance or mixture
Carcinogenicity Category 1A (H350) Specific target organ toxicity, single exposure; Respiratory tract irritation - Category 3 (H335) Specific target organ toxicity, repeated exposure - Category 1A (H372)
