Note: Ingredients listed on restricted chemical lists
EC/CAS
9002-84-0
Name of the chemical
Polytetrafluoroethylene
Concentration
N/A
General Information
Revision date
2003-12-21
Product name
POLYFLON PTFE Molding Powder
Product Synonyms
Polytetrafluoroethylene (PTFE)
CAS No.
9002-84-0
1.2.1 Relevant identified uses
for U.S.A only>
Manufacturer Name
DAIKIN FLUOROCHEMICALS(CHINA)CO., LTD
Icons in SDS
Company Information
company name
DAIKIN FLUOROCHEMICALS(CHINA)CO., LTD
GHS Information
Signal word
WARNING
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW Not considered hazardous under normal usage. Harmful if thermal decomposition products are inhaled. Normally inhalation problems should not be expected.
Potential health effects
Inhalation Vapors and fumes liberated during hot processing (above 260 C) with this material may cause flu-like symptoms (chills, fever and, sometimes, cough) that may not occur until several hours after exposure and typically pass within about 36 to 48 hours. Eye Normally low irritation to the eyes is expected. Skin Low-irritating to skin. Ingestion Small amounts (tablespoon full) swallowed during normal handling operation are not likely to cause injury. Swallowing larger than that may cause injury. Chronic No information found. WARNING This fluoropolymer resin may react at lower temperatures. In addition, other materials known to catalyze these reactions include silica, TiO2, bromides, metallic salts and glass fibers/beads. POLYFLON PTFE Molding Powder DAIKIN-POLYFLON PTFE Molding Powder 2/4page
