CEVIAN (ABS resin)

SECTION 2: Hazards identification

GHS Classification Important Hazards and Effects:

Other physicochemical hazards

Dust may cause dust explosion. 1. Flammable solids Classification not possible 2. Self-reactive substances and mixtures Classification not possible 3. Pyrophoric solids Not classified 4. Self-heating substances and mixtures Classification not possible 5. Substances and mixtures which, in contact with water, Classification not possible emit flammable gases 6. Oxidizing solids Classification not possible 7. Corrosive to metals Classification not possible

Potential health effects

Polymer particulates may be inhalation-hazardous. - Gases and fumes evolved during processing may irritate the respiratory tract, skin and eyes. Specific hazards - Hot molten material can cause thermal burns in contact with skin.

Health hazards

1. Acute toxicity (oral) Not classified 2. Acute toxicity (dermal) Classification not possible 3. Acute toxicity (gases) Not applicable 4. Acute toxicity (vapours) Classification not possible 5. Acute toxicity (dusts and mists) Classification not possible 6. Skin corrosion/irritation Not classified 7. Serious eye damage/eye irritation Not classified 8. Respiratory sensitization Classification not possible 9. Skin sensitization Classification not possible 10. Germ cell mutagenicity Not classified 11. Carcinogenicity Category 2 12. Reproductive toxicity Not classified 13. Effects on or via lactation Classification not possible 14. Specific target organ toxicity (Single exposure) Not classified 15. Specific target organ toxicity (Repeated exposure) Not classified

Aspiration hazard

Not applicable

Environmental hazards

1. Hazards to the aquatic environment (acute) Category 3 2. Hazards to the aquatic environment (chronic) Category 3 3. Hazard to the ozone layer Classification not possible

Signal word

Warning

Hazard statements

Suspected of causing cancer. Harmful to aquatic life. Harmful to aquatic life with long lasting effects.

Prevention

Read the Safety Data Sheet (SDS) before handling the material. Do not handle until all safety precautions have been understood. - Use protective gears when you handle the material. - Provide a local ventilation system in the processing room. - Avoid release to the environment. - Use appropriate fire extinguisher in case of fire.

Response

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. - If eye irritation persists: Get medical advice/attention. - IF ON SKIN: Wash with plenty of water. - If exposed or concerned: Get medical advice/attention.

Storage

Protect from sunlight. Store away from heat, open flames and all ignition sources. - Store locked up.

Disposal

Dispose of contents and container should be in accordance with applicable laws and ordinances.