MOLY

SECTION 2: Hazards identification

NFPA Rating Combustible at high temp

NFPA Ratings

1.1.0 Combustion products: CO, CO2, Smoke, Sulfur, Nitrogen, Phosphorous, Zinc, and Molybdenum Compounds. Flash Point Deg F/C: >370/>188 LEL %: N/A % UEL %: N/A % Extinguishing Media: Water Fog, Foam, Dry Chemical, CO2, Sand, or Earth. UN/NA/PIN#: N/A Special Fire Fighting Procedures Firefighters should wear self-contained breathing equipment. Treat as a Class B fire. Use (Continued) Page 2 PRODUCT NAME: MOLY 5 #2 - BULK LBS Date: 03/02/05 SUPERCEDES DATE: 09/18/03 water to cool threatened containers. Auto Ign. Temp Deg F/C: >500/>260 Unusual fire and explosion hazards: N/A Explosion Power: N/A Impact Sensitive: No Burning Rate: Low Static Sensitive: No SECTION 5

Health hazards

DATA Product Guide: TLV see Section 2 STEL: see Section 2

Principle Routes of Exposure

Skin contact, Eye, Inhalation, Ingestion Effects of Overexposure: Acute; may cause respiratory system, skin, and/or eye irritation. Ingestion may cause nausea, cramps, diarrhea, and other gastrointestinal disorders. Chronic; excess mist may cause respiratory problems. Excess skin contact may cause dryness and/or sensitization. Excess inhalation and/or ingestion may be harmful to respiration system and heart. Any suspected carcinogen = or > 0.1%?: NO Emergency and First Aid Procedures Eye: Immediately flush with plenty of water for 15 minutes and call a physician. Inhalation: If affected, remove to fresh air, administer oxygen and call a physician. Skin: Wash thoroughly with plenty of water and soap. Ingestion: Seek a physician immediately, show MSDS or Label; Do Not Induce vomiting. Wash soiled clothing before wearing again. SECTION 6 -— REACTIVITY DATA Stable: YES Conditions to Avoid: N/A Incompatibility (Materials to avoid): YES, strong oxidizing agents Hazardous Decomposition Products: YES, combustion products, see Section Hazardous Polymerization: NO Conditions to Avoid: N/A SECTION 7 -— SPILL OR LEAK PROCEDURES Listed in SARA Title III, #302: NO #304, Cercla: NO #313: YES Steps to be taken in case material is released or spilled: Eliminate source if safe to do so. Prevent from entering waterways and drains. Wear suitable personal protective equipment. Dike and absorb with inert material and transfer to a sealed approved container for disposal. Report Quantity, Lb: N/A Kg: N/A TPQ, Lb: N/A Regulations: SARA