Note: Ingredients listed on restricted chemical lists
EC/CAS
1309-64-4
Name of the chemical
Diantimontrioxid
Concentration
1-5
EC/CAS
131-17-9
Name of the chemical
Diallyl phthalate
Concentration
<0.004
EC/CAS
7440-38-2
Name of the chemical
Arsenic (As)
Concentration
<0.004
General Information
Revision date
2017-11-10
Product name
CYCOM 4102A Prepreg
Product Synonyms
None
Chemical name
Resin impregnated on structural fabric or fiber
1.2.1 Relevant identified uses
Engineered materials CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETON, NEW JERSEY 08540, USA
Emergency telephone
(24 hours/day) - For emergency only involving spill, leak, fire, exposure or accident call
Icons in SDS
Company Information
company name
CYTEC INDUSTRIES INC
GHS Information
Signal word
Warning
Section 2
2.1 Classification of the substance or mixture
Germ Cell Mutagenicity Hazard Category 2 Carcinogenicity Hazard Category 2 Specific Target Organ Toxicity - Repeated Exposure Hazard Category 2 Skin Corrosion / Irritation Hazard Category 2 Skin Sensitizer Hazard Category 1B
Signal word
Warning
Hazard statements
Suspected of causing cancer Suspected of causing genetic defects May cause damage to organs through prolonged or repeated exposure Causes skin irritation May cause an allergic skin reaction
Precautionary statements
Obtain special instructions before use. Wear protective gloves/protective clothing/eye protection/face protection. Do not breathe dust/fume/gas/mist/vapours/spray. Wash face, hands and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. IF exposed or concerned: Get medical advice/attention. Get medical advice/attention if you feel unwell. IF ON SKIN: Wash with plenty of soap and water. Specific treatment (see supplemental first aid instructions on this label). Take off all contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention. Store locked up. Dispose of contents/container in accordance with local and national regulations.
2.3 Other hazards
HNOC), Other Hazards Polymerization may occur from excessive heat, contamination or exposure to direct sunlight. By excessive exposure to dust, eye and respiratory tract irritation is possible. −⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯−−
