Note: Ingredients listed on restricted chemical lists
EC/CAS
26471-62-5
Name of the chemical
m-Tolylidendiisocyanat
Concentration
N/A
EC/CAS
70657-70-4
Name of the chemical
2-methoxypropylacetate
Concentration
N/A
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
N/A
General Information
Revision date
2016-02-18
Product name
CONATHANE CE-1164 Urethane Prepolymer
Product Synonyms
None
Chemical name
Toluene diisocyanate based polyurethane polymer solution
1.2.1 Relevant identified uses
Polyurethane casting elastomers CYTEC INDUSTRIES INC., FIVE GARRET MOUNTAIN PLAZA, WOODLAND PARK, NEW JERSEY 07424, USA
Emergency telephone
(24 hours/day) - For emergency only involving spill, leak, fire, exposure or accident call
Icons in SDS
Company Information
company name
CYTEC INDUSTRIES INC
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
Flammable Liquid Hazard Category 2 Carcinogenicity Hazard Category 2 Reproductive Toxicant Category 1B Acute Toxicity (Inhalation) Hazard Category 3 Specific Target Organ Toxicity - Repeated Exposure Hazard Category 1 Specific Target Organ Toxicity - Single Exposure Hazard Category 3 Skin Corrosion / Irritation Hazard Category 2 Serious Eye Damage / Eye Irritation Hazard Category 2A Skin Sensitizer Hazard Category 1B Respiratory Sensitizer Hazard Category 1
Aspiration hazard
Category 1 Aquatic Environment Acute Hazard Category 3
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor Suspected of causing cancer May damage fertility or the unborn child Toxic if inhaled Causes damage to organs through prolonged or repeated exposure May cause drowsiness or dizziness Causes skin irritation Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May be fatal if swallowed and enters airways Harmful to aquatic life
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/Bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wear protective gloves/protective clothing/eye protection/face protection. Obtain special instructions before use. Use only outdoors or in a well-ventilated area. Do not breathe dust/fume/gas/mist/vapours/spray. Wash face, hands and any exposed skin thoroughly after handling. Do not eat, drink or smoke when using this product. Wear respiratory protection. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. In case of fire: Use CO2, dry chemical, or foam for extinction. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician. Specific treatment (see supplemental first aid instructions on this label). Take off all contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting. Store in a well-ventilated place. Keep cool. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local and national regulations.
2.3 Other hazards
HNOC), Other Hazards Polymerization may occur from excessive heat, contamination or exposure to direct sunlight. Contamination or excessive heat may result in dangerous pressure. The inhalation of airborne droplets or aerosols may cause irritation of the respiratory tract.