Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
25-50%
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
50-75%
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
7%
General Information
Revision date
2017-04-03
Product name
UCT-PU A&B
Manufacturer Name
CTM Adhesives Inc
Icons in SDS
Company Information
company name
CTM Adhesives Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
GHS Classification GHS Classification of hazardous product Acute Toxicity, Inhalation-mist (Category 4) Skin Sensitization (Category 1B) Serious eye damage/irritation (Category 2B) AND Respiratory sensitization (Category 1) Carcinogenicity (Category 2) Specific target organ toxicity-single exposure (Category 3- respiratory tract irritation) Specific target organ toxicity-repeated exposure (Category 2- by inhalation)
2.2 Label elements
Hazard Pictograms/symbols ADHESIVES container tightly closed. P405 Store locked up. P501 Dispose of contents/container into safe container in accordance with local, regional or
Signal word
DANGER Hazard and Precautionary Statements: H320 Causes eye irritation. H315 Causes skin irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs (olfactory) through prolonged o repeated exposure (inhalation). P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P280 Wear protective gloves. P271 Use only outdoors or in a well-ventilated area. P260 Do not breathe dust/gas/mist/vapours. P261 Avoid breathing mist. P284 In case of inadequate ventilation wear respiratory protection. P272 Contaminated work clothing should not be allowed out of the workplace. P264 Wash with plenty of water and soap thoroughly after handling. P312 Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308 + P311 IF exposed or concerned: Call a POISON CENTER or doctor/physician. P314 Get medical advice/attention if you feel unwell. P303 + P352 IF ON SKIN or hair) Wash with plenty of soap and water. P333 + P311 If skin irritation or rash occurs Call a POISON CENTER or doctor/physician P332 + P313 If skin irritation occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash before reuse. P337 + P311 If eye irritation occurs: Call a POISON CENTER or doctor/physician. P403 + P233 Store in a well-ventilated place. Keep national regulations. CTM
Other hazards
Known None known GHS Special Labeling: EUH204 Contains isocyanates. May produce an allergic reaction. Inhalation of isocyanate mists or vapors may cause respiratory irritation, breathlessness, chest discomfort and reduced pulmonary function. Overexposure well above the pel may result in bronchitis, bronchial spams and pulmonary edema. Long-term exposure to isocyanates has been reported to cause lung damage, including reduced lung function which may be permanent. Acute or chronic overexposure to isocyanates may cause sensitization in some individuals, resulting in allergic respiratory reactions including wheezing, shortness of breathe and difficulty breathing. Animal tests indicate that skin contact may play a role in causing respiratory sensitization.