Note: Ingredients listed on restricted chemical lists
EC/CAS
556-67-2
Name of the chemical
D4
Concentration
N/A
EC/CAS
68909-20-6
Name of the chemical
Silanamine, 1,1,1-trimethyl-N-(trimethylsilyl)-, hydrolysis products with silica
Concentration
N/A
EC/CAS
209-136-7
Name of the chemical
Octamethylcyclotetrasiloxane
Concentration
N/A
General Information
Revision date
2012-03-09
Product name
Si-COAT 570 RTV Silicone High Voltage Insulator Coating
1.2.2. Uses advised against
identified
supplier name
INTERTEK France
Manufacturer Name
CSL Silicones Inc
Emergency telephone
+1 519 836 9044 (8 AM- 5 PM EST, Monday- Friday
Icons in SDS
Company Information
company name
INTERTEK France
e-mail address of the competent person responsible for the Safety Data Sheet
iasf.Reach@intertek.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H336, H411
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flam. Liq. 3 H226 Skin Irrit. 2 H315 Eye Irrit. 2 H319 Skin Sens. 1 H317 STOT SE 3 H336 Aquatic Chronic 2 H411
Hazard statements
see section 16 see section 16 : H226 - Flammable liquid and vapour H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H336 - May cause drowsiness or dizziness H411 - Toxic to aquatic life with long lasting effects
EU Classification
Directive 67/548/EEC or 1999/45/EC R10 Xi; R43 Xi; 38 N; R51/53
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms
GHS02 GHS07 GHS09
Signal word
Warning
Precautionary statements
P210 - Keep away from heat, hot surfaces, open flames, sparks. - No smoking. P261 - Avoid breathing mist, spray, vapours. P280 - Wear eye protection, protective clothing, protective gloves. P302+P352 - IF ON SKIN: Wash with plenty of soap and water P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P501 - Dispose of contents/container to hazardous or special waste collection point.
2.3 Other hazards
This substance/mixture does not meet the PBT criteria of REACH, annex XIII. This substance/mixture does not meet the vPvB criteria of REACH, annex XIII.
Other hazards which do not result in classification
Petroleum Naphtha is released into the air during drying and curing process. Methyl Ethyl Ketoxime (MEKO) is a curing by-product that is released when the coating comes in contact with humid air.
