Note: Ingredients listed on restricted chemical lists
EC/CAS
200-578-6/64-17-5
Name of the chemical
Ethanol
Concentration
93-95%
EC/CAS
203-550-1/108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
3-4%
EC/CAS
265-192-2/64742-89-8
Name of the chemical
Solvent naphtha (petroleum), light aliph
Concentration
<1% 3%
General Information
Revision date
2017-01-04
Product name
Clearweld Solution (Ethanol)
1.2.1 Relevant identified uses
Clearweld coatings are applied to plastic substrates so that they can absorb infrared energy and thereby form weld joins between substrates
Emergency telephone
800-424-9300, 703-527-3887
Icons in SDS
Company Information
company name
Crysta-Lyn Chemical Company, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H319, H340, H350, H401, H411
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture To the best of our knowledge, the toxicological properties of this mixture have not been thoroughly investigated. Use appropriate procedures and precautions to prevent or minimize exposure
Signal word
Danger H225 Highly flammable liquid and vapor H319 Causes serious eye irritation H340 May cause genetic defects H350 May cause cancer H401 Toxic to aquatic life H411 Toxic to aquatic life with long lasting effects
Prevention
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking P233 Keep container tightly closed P240 Ground/Bond container and receiving equipment P241 Use explosion-proof electrical/ventilating/lighting/equipment P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P264 Wash face, hands and any exposed skin thoroughly after handling P273 Avoid release to the environment P280 Wear protective gloves/protective clothing/eye protection/ face protection P270 Do not eat, drink or smoke when using this product
Response
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P308+P313 IF exposed or concerned: Get medical advice/attention P337+P313 If eye irritation persists: Get medical advice/attention. P370+P378 In case of fire: Use CO2, water for, dry chemical, or foam for extinction.
Storage
P403+P235 Store in a well ventilated place. Keep container cool. P405 Store locked up.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant
2.3 Other hazards
Static accumulating flammable liquid can become electrostatically charged even in bonded and grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
2.1 Classification of the substance or mixture
To the best of our knowledge, the toxicological properties of this mixture have not been thoroughly investigated. Use appropriate procedures and precautions to prevent or minimize exposure. GHS Classification in accordance with 29 CFR 1910 (OSHA HCS) Flammable liquid (Category 2), H225 Serious eye damage/eye irritation (Category 2A), H319 Germ cell mutagenicity (Category 1B), H340 Carcinogenicity (Category 1B), H350 Hazard to the aquatic environment, acute hazard (Category 2), H401 Hazardous to the aquatic environment long-term hazard (Category 2), H411 For the full text of the H-Statements mentioned in this Section, see Section 16.