Note: Ingredients listed on restricted chemical lists
EC/CAS
8050-26-8
Name of the chemical
rosin, ester with pentaerythritol
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Revision date
2017-06-08
Product name
Intersection Grade White Alkyd Thermoplastic
Manufacturer Name
Crown Technology, LLC
Icons in SDS
Company Information
company name
Crown Technology, LLC
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
Skin Irritation, Category 3 Eye Irritation, Category 2B Skin Sensitization, Category 1 Respiratory Sensitization, Category 1
Signal word
Danger
Hazard statements
Causes mild skin irritation Causes eye irritation May cause an allergic skin reaction May cause allergy or asthma symptoms or breathing difficulties if inhaled
Precautionary statements
Wash hands thoroughly after handling. Avoid breathing dust and fumes. Wear NIOSHA/MSHA approved respiratory protection ( organic vapor/dust filtering respirator is recommended), face shields, heat resistant gloves, long sleeve shirts, long pants, socks, hard soled shoes, and hats. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor. Contaminated clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Disposal should be made in accordance with Federal, State, and Local regulations. Packaged/Powdered Form – Physical Form/Appearance: White Powdered/Granular Material Primary Routes of Absorption: Eyes - Dermal - Inhalation – Ingestion Eye and Dermal Irritation: As Nuisance Dust Inhalation: Overexposure may be irritating to the respiratory track. Molten/Hot Form – Primary Routes of Absorption: Eyes, Dermal and Inhalation Eye and Inhalation: Overexposure to hot fumes of molten thermoplastic may cause irritation to the eyes and respiratory tract. As always, care should be taken not to breathe hot fumes of any type. If such inhalation occurs, remove to a well ventilated area. Skin: Heated thermoplastic can cause serious burns to unprotected skin.
