Copper-Tin Covered Electrode

Hazard statements (CLP)

H302, H315, H317, H319, H335, H336, H351, H362, H372, H400

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

Classification of the mixture This product is placed on the market in solid form Classification in accordance with GHS-US Acute Tox. 4 (Oral) H302 STOT SE 3 H336 Skin Irrit. 2 H315 Carc. 2 H351 Skin Sens. 1 H317 Repr. Tox. Lact H362 Eye Irrit. 2A H319 STOT RE 1 H372 STOT SE 3 H335 Aquatic Acute 1 H400

2.2 Label elements

GHS-US labelling

Hazard pictograms

GHS07 GHS08 GHS09

Signal word

Danger

Hazard statements

H302 – Harmful if swallowed H336 – May cause drowsiness or dizziness H317 – May cause an allergic skin reaction H351 – Suspected of causing cancer H315 – Causes skin irritation H362 – May cause harm to breast-fed children H319 – Causes serious eye irritation H372 – Causes damage to organs through prolonged or repeated exposure H335 – May cause respiratory irritation H400 – Very toxic to aquatic life

Precautionary statements

P201 – Obtain special instructions before use P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P202 – Do not handle until all safety precautions have been read and understood P308+P313 – IF EXPOSED OR CONCERNED: Get medical advice/attention P260 – Do not breathe dust/fume/gas/mist/vapors/spray P314 – Get medical advice and attention if you feel unwell P261 – Avoid breathing dust/fume/gas/mist/vapors/spray P321 – Specific treatment (see label) P264 – Wash thoroughly after handling P330 – If swallowed, rinse mouth P270 – Do not eat, drink or smoke when using this product P333+P313 – If skin irritation or rash occurs: Get medical advice/attention P272 – Contaminated work clothing should not be allowed out of the workplace P337+P313 – If eye irritation persists: Get medical advice/attention P273 – Avoid release to the environment P362+P364 – Take off contaminated clothing and wash it before reuse P280 – Wear protective gloves/protective clothing/eye protection/face protection P391 – Collect spillage P285 – In case of inadequate ventilation wear respiratory protection P403+P233 – Store in a well-ventilated place. Keep container tightly closed P301+P312 – If swallowed: Call a poison center or physician if you feel unwell P405 – Store locked up P302+P352 – IF ON SKIN: Wash with plenty of soap and water P501- Dispose of contents/container in accordance with local/regional/national/ international regulations

2.3 Other hazards

No additional information available

Ingredient(s) with unknown acute toxicity

No data available

Other hazards which do not result in classification

Electrical shock can kill. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using these alloys. Refer to Section 8. Substance(s) formed under the conditions of use: The welding fumes produced from these welding alloys may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below: Chemical Identity CAS-No. Chemical Identity CAS-No. Chemical Identity CAS-No. Carbon Dioxide 124-38-9 Ozone 10028-15-6 Nickel 7440-02-0 Carbon Monoxide 630-08-0 Nitrogen Dioxide 10102-44-0 Fluorides (as F) 16984-48-8

2.1 Classification of the substance or mixture

This product is placed on the market in solid form 2.1.1 Classification in accordance with GHS-US Acute Tox. 4 (Oral) H302 STOT SE 3 H336 Skin Irrit. 2 H315 Carc. 2 H351 Skin Sens. 1 H317 Repr. Tox. Lact. H362 Eye Irrit. 2A H319 STOT RE 1 H372 STOT SE 3 H335 Aquatic Acute 1 H400