Cold-Galvanizing Zinc Primer in Aerosol Containers

Hazard statements (CLP)

H229, H280, H315, H319, H335, H336, H351, H373

Code

Statements

H229

Pressurized container: may burst if heated

H280

Contains gas under pressure; may explode if heated

H315

Causes skin irritation

H319

Causes serious eye irritation

H335

May cause respiratory irritation

H336

May cause drowsiness or dizziness

H351

Suspected of causing cancer

H373

May cause damage to organs through prolonged or repeated exposure

SECTION 2: Hazards identification

result in GHS classification: Classification of the mixture This product is placed on the market in a pressurized container Classification in accordance with GHS-US Aerosol 3 H229 STOT SE 3 H335 Press. Gas H280 STOT SE 3 H336 Skin Irrit. 2 H315 Carc. 2 H351 Eye Irrit. 2A H319 STOT RE 2 H373

2.2 Label elements

GHS-US labelling

Hazard pictograms

GHS04 GHS08 GHS07

Signal word

Warning

Hazard statements

H229 – Pressurized container: May burst if heated H335 – May cause respiratory irritation H280 – Contains gas under pressure; may explode if heated H336 – May cause drowsiness or dizziness H315 – Causes skin irritation H351 – Suspected of causing cancer H319 – Causes serious eye irritation H373 – May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P260 – Do not breathe dust/fume/gas/mist/vapors/spray P308 + P313 – IF exposed or concerned: Get medical advice/attention P261 – Avoid breathing dust/fume/gas/mist/vapors/spray P312 – Call a POISON CENTER or physician if you feel unwell P264 – Wash thoroughly after handling P314 – Get medical advice and attention if you feel unwell P270 – Do not eat, drink or smoke when using this product P332 + P313 – If skin irritation occurs: Get medical advice/attention P271 – Use only outdoors or in a well-ventilated area P337 + P313 – If eye irritation persists: Get medical advice/attention P280 – Wear protective gloves/protective clothing/eye protection/face protection P362 – Take off contaminated clothing and wash before reuse P302 + P352 – IF ON SKIN: Wash with plenty of soap and water P403+P233 – Store in a well-ventilated place. Keep container tightly closed P304 + P340 – IF INHALED: Remove victim to fresh air and keep at rest in a P405 – Store locked up position comfortable for breathing P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several P501- Dispose of contents/container in accordance with local / regional / minutes. Remove contact lenses, if present and easy to do. Continue rinsing. national / international regulations

2.3 Other hazards

Caution: Contents under pressure Aerosol: Do not puncture or incinerate. Do not expose to heat or store at temperatures above 120ºF

Ingredient(s) with unknown acute toxicity

No data available

Other hazards which do not result in classification

Electrical shock can kill. (When product is used in conjunction with welding) Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using these alloys. Refer to Section 8. Substance(s) formed under the conditions of use: Welding fumes may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below: Chemical Identity CAS-No. Chemical Identity CAS-No. Chemical Identity CAS-No. Carbon Dioxide 124-38-9 Ozone 10028-15-6 Nitrogen Dioxide 10102-44-0 Carbon Monoxide 630-08-0

2.1 Classification of the substance or mixture

This product is placed on the market in a pressurized container 2.1.1 Classification in accordance with GHS-US Aerosol 3 H229 STOT SE 3 H335 Press. Gas H280 STOT SE 3 H336 Skin Irrit. 2 H315 Carc. 2 H351 Eye Irrit. 2A H319 STOT RE 2 H373