Chrome Moly and Low Alloy Bare Wire

Hazard statements (CLP)

H317, H335, H336, H350, H372

Code

Statements

H317

May cause an allergic skin reaction

2.1 Classification of the substance or mixture

This product is placed on the market in solid form 2.1.1 Classification in accordance with GHS-US Skin Sens. 1 H317 STOT RE 1 H372 Carc. 1B H350

2.2 Label elements

GHS-US labelling

Hazard pictograms

GHS07 GHS08

Signal word

Danger

Hazard statements

H317 – May cause an allergic skin reaction H350 – May cause cancer H335 – May cause respiratory irritation H372 – Causes damage to organs through prolonged or repeated exposure H336 – May cause drowsiness or dizziness

Precautionary statements

P201 – Obtain special instructions before use P308+P313 – IF EXPOSED OR CONCERNED: Get medical advice/attention P202 – Do not handle until all safety precautions have been read and P304+P340 – IF INHALED: Remove person to fresh air and keep understood comfortable for breathing P260 – Do not breathe dust/fume/gas/mist/vapors/spray P312 – Call a POISON CENTER or physician if you feel unwell P261 – Avoid breathing dust/fume/gas/mist/vapors/spray P314 – Get medical advice and attention if you feel unwell P264 – Wash thoroughly after handling P321 – Specific treatment (see label) P270 – Do not eat, drink or smoke when using this product P333+P313 – If skin irritation or rash occurs: Get medical advice/attention P271 – Use only outdoors or in a well-ventilated area P362+P364 – Take off contaminated clothing and wash it before reuse P272 – Contaminated work clothing should not be allowed out of the workplace P403+P233 – Store in a well-ventilated place. Keep container tightly closed P280 – Wear protective gloves/protective clothing/eye protection/face protection P405 – Store locked up P302+P352 – IF ON SKIN: Wash with plenty of soap and water P501- Dispose of contents/container in accordance with local / regional / national / international regulations

2.3 Other hazards

No additional information available

Ingredient(s) with unknown acute toxicity

No data available

Other hazards which do not result in classification

Electrical shock can kill. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using these alloys. Refer to Section 8. Substance(s) formed under the conditions of use: The welding fumes produced from these welding alloys may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below: Chemical Identity CAS-No. Chemical Identity CAS-No. Chemical Identity CAS-No. Carbon Dioxide 124-38-9 Ozone 10028-15-6 Manganese 7439-96-5 Carbon Monoxide 630-08-0 Nitrogen Dioxide 10102-44-0 Chromium Oxide 1308-38-9 Nickel 7440-02-0 Chromium (VI) 18540-29-9