Note: Ingredients listed on restricted chemical lists
EC/CAS
75-09-2
Name of the chemical
Methylene chloride
Concentration
N/A
General Information
Revision date
2019-01-28
Product name
Anti-Spatter and Nozzle Shield in Aerosol Containers
CAS No.
75-09-2
supplier name
Crown Alloys Company
Icons in SDS
Company Information
company name
Crown Alloys Company
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H229, H280, H315, H319, H335, H336, H351, H371
Hazard statements
Code
Statements
H229
Pressurized container: may burst if heated
H280
Contains gas under pressure; may explode if heated
H315
Causes skin irritation
H319
Causes serious eye irritation
H335
May cause respiratory irritation
H336
May cause drowsiness or dizziness
H351
Suspected of causing cancer
H371
May cause damage to organs
Section 2
2.1 Classification of the substance or mixture
This product is placed on the market in a pressurized container 2.1.1 Classification in accordance with GHS-US Aerosol 3 H229 STOT SE 3 H335 Press. Gas H280 STOT SE 3 H336 Skin Irrit. 2 H315 Carc. 2 H351 Eye Irrit. 2A H319 STOT SE 2 H371
2.2 Label elements
GHS-US labelling
Hazard pictograms
GHS04 GHS08 GHS07
Signal word
Danger
Hazard statements
H229 – Pressurized container: May burst if heated H335 – May cause respiratory irritation H280 – Contains gas under pressure; may explode if heated H336 – May cause drowsiness or dizziness H315 – Causes skin irritation H351 – Suspected of causing cancer H319 – Causes serious eye irritation H371 – May cause damage to organs (Nervous System)
Precautionary statements
P201 – Obtain special instructions before use P308 + P313 – IF exposed or concerned: Get medical advice/attention P202 – Do not handle until all safety precautions have been read and understood P312 – Call a POISON CENTER or physician if you feel unwell P260 – Do not breathe dust/fume/gas/mist/vapors/spray P314 – Get medical advice and attention if you feel unwell P261 – Avoid breathing dust/fume/gas/mist/vapors/spray P332 + P313 – If skin irritation occurs: Get medical advice/attention P264 – Wash thoroughly after handling P337 + P313 – If eye irritation persists: Get medical advice/attention P270 – Do not eat, drink or smoke when using this product P362 – Take off contaminated clothing and wash before reuse P271 – Use only outdoors or in a well-ventilated area P403+P233 – Store in a well-ventilated place. Keep container tightly closed P280 – Wear protective gloves/protective clothing/eye protection/face protection P405 – Store locked up P302 + P352 – IF ON SKIN: Wash with plenty of soap and water P410 – Protect from sunlight P304 + P340 – IF INHALED: Remove victim to fresh air and keep at rest in a P501- Dispose of contents/container in accordance with local / regional / position comfortable for breathing national / international regulations P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
2.3 Other hazards
Caution: Contents under pressure Aerosol: Do not puncture or incinerate. Do not expose to heat or store at temperatures above 120ºF
Ingredient(s) with unknown acute toxicity
No data available
Other hazards which do not result in classification
Electrical shock can kill. (When product is used in conjunction with welding) Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using these alloys. Refer to Section 8. Substance(s) formed under the conditions of use: Welding fumes may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below: Chemical Identity CAS-No. Chemical Identity CAS-No. Chemical Identity CAS-No. Carbon Dioxide 124-38-9 Ozone 10028-15-6 Nitrogen Dioxide 10102-44-0 Carbon Monoxide 630-08-0