Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
60-100
EC/CAS
1305-62-0
Name of the chemical
Calcium dihydroxide
Concentration
1-5
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<1
General Information
Revision date
2025-08-31
Product name
Tek-Crete Aggregate CPC Urethane Cement Fine Aggregate
1.2.1 Relevant identified uses
Deck Covering Polymer Admix
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
Crossfield Products Corp
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H317, H318, H331, H333, H334, H335, H350, H373
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
NFPA Rating GHS Classification Acute Toxicity Oral – Category 4 Acute Toxicity Dermal – Category 4 Acute Toxicity Inhalation – Category 3 Skin Corrosion/Irritation – Category 1B Eye Damage – Category 1 Respiratory Sensitization – Category 1 Skin Sensitization – Category 1 Carcinogenicity – Category 1A Specific Target Organ Toxicity Repeated – Category 1 Signal Word: Danger Hazard Statements
Precautionary statements
•H333: May be harmful if inhaled •P102: Keep out of reach of children •H335: May cause respiratory irritation •P103: Read label before use •H318: Causes serious eye damage •P280: Wear protective gloves/protective clothing/eye •H303: May be harmful if swallowed protection/face protection •H373: May cause damage to organs through prolonged or •P501: Dispose of contents and container in accordance with all repeated exposure (lungs) local, regional, national and international regulations. •H331: Toxic if inhaled •P264: Wash … thoroughly after handling •H314: Causes severe skin burns and eye damage •P270: Do not eat, drink or smoke when using this product •H334: May cause allergy or asthma symptoms or breathing •P272: Contaminated work clothing should not be allowed out of difficulties if inhaled the workplace •H317: May cause an allergic skin reaction •P260: Do not breathe dust/fume/gas/mist/vapors/spray •H350: May cause cancer •P271: Use only outdoors or in a well-ventilated area •P285: In case of inadequate ventilation wear respiratory protection HEALTH 2 Health = 2 0 HMIS-RATINGS (SCALE 0 – 4) FLAMMABILITY 0 Fire = 0
NFPA Ratings
2 0 Reactivity = 0 REACTIVITY 0 EMERGENCY OVERVIEW: This product is a colored dry powder. A single short term exposure to the dry powder is not likely to cause serious harm. However, exposure of sufficient duration to wet mixture can cause serious, potentially irreversible tissue (skin or eye) destruction in the form of chemical (caustic burns. The same type of tissue destruction can occur if wet or moist areas of the body are exposed for sufficient duration to dry product. SYMPTOMS OF OVER-EXPOSURE BY ROUTE OF EXPOSURE: The most significant route of occupational overexposure is contact with skin. The symptoms of overexposure to this product are as follows: INHALATION: It is possible to breathe this material under certain conditions of handling and use (for example, during mixing or spraying in a confined area). Breathing small amounts of this material during normal handling is not likely to cause harmful effects. Breathing large amounts may be harmful. CONTACT WITH SKIN or EYES: Contact with the eyes may cause slight transient (temporary) eye irritation. Corneal injury is unlikely. Prolonged or repeated skin contact may dry the skin. Symptoms may include redness, drying and cracking of skin. Additional symptoms of skin contact may include: allergic skin reaction (delayed skin rash which may be followed by blistering, scaling and other skin effects), and numbness. INGESTION: Ingestion is not anticipated to be a significant route of over-exposure to this product. INJECTION: Though injection is not anticipated to be a significant route of over-exposure to this product, if it occurs, local reddening, tissue swelling, and discomfort may result. HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms. ACUTE: Contact with this solution may cause irritation of the eyes, skin, mucous membranes, and any other exposed tissue. If inhaled, irritation of the respiratory system may occur, with coughing, and breathing difficulty. CHRONIC: Repeated skin contact with this product may result in dermatitis (inflammation and reddening of the skin). Prolonged or repeated exposure may cause liver and kidney damage.
2.1 Classification of the substance or mixture
•Acute Toxicity Oral – Category 4 •Acute Toxicity Dermal – Category 4 •Acute Toxicity Inhalation – Category 3 •Skin Corrosion/Irritation – Category 1B •Eye Damage – Category 1 •Respiratory Sensitization – Category 1 •Skin Sensitization – Category 1 •Carcinogenicity – Category 1A •Specific Target Organ Toxicity Repeated – Category 1