Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
40-70 1332-09- 3-7
General Information
Revision date
2018-02-07
Product name
Quik-Set Powder
Product Synonyms
Modified Cement Mortar
Chemical name
Modified Cement Mortar
Emergency telephone
800-424-9300
Icons in SDS
Company Information
company name
Crossfield Products Corp
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H303, H314, H317, H318, H331, H333, H334, H335, H350, H373
Hazard statements
Code
Statements
H303
May be harmful if swallowed
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity Oral Category 4 Acute Toxicity Dermal Category 4 Acute Toxicity Inhalation Category 3 Skin Corrosion/Irritation Category 1B Eye Damage Category 1 Respiratory Sensitization Category 1 Skin Sensitization Category 1 Carcinogenicity Category 1A Specific Target Organ Toxicity Repeated Category 1
Precautionary statements
H333: May be harmful if inhaled P102: Keep out of reach of children H335: May cause respiratory irritation P103: Read label before use H318: Causes serious eye damage P280: Wear protective gloves/protective clothing/eye H303: May be harmful if swallowed protection/face protection H373: May cause damage to organs through prolonged or P501: Dispose of contents and container in accordance with all repeated exposure (lungs) local, regional, national and international regulations. H331: Toxic if inhaled P264: H314: Causes severe skin burns and eye damage P270: Do not eat, drink or smoke when using this product H334: May cause allergy or asthma symptoms or breathing P272: Contaminated work clothing should not be allowed out of difficulties if inhaled the workplace H317: May cause an allergic skin reaction P260: Do not breathe dust/fume/gas/mist/vapors/spray H350: May cause cancer P271: Use only outdoors or in a well-ventilated area P285: In case of inadequate ventilation wear respiratory protection HMIS-RATINGS (SCALE 0 4) HEALTH 2
NFPA Ratings
Health = 2 0 FLAMMABILITY 0 Fire = 0 2 0 REACTIVITY 0 Reactivity = 0 EMERGENCY OVERVIEW: For Routine Industrial Applications SYMPTOMS OF OVER-EXPOSURE BY ROUTE OF EXPOSURE: The most significant route of occupational overexposure is contact with skin. The symptoms of overexposure to this product are as follows: INHALATION: It is possible to breathe this material under certain conditions of handling and use (for example, during mixing or spraying in a confined area). Breathing small amounts of this material during normal handling is not likely to cause harmful effects. Breathing large amounts may be harmful. CONTACT WITH SKIN or EYES: Contact with the eyes may cause slight transient (temporary) eye irritation. Corneal injury is unlikely. Prolonged or repeated skin contact may dry the skin. Symptoms may include redness, drying and cracking of skin. Additional symptoms of skin contact may include: allergic skin reaction (delayed skin rash which may be followed by blistering, scaling and other skin effects), and numbness. INGESTION: Ingestion is not anticipated to be a significant route of over-exposure to this product. INJECTION: Though injection is not anticipated to be a significant route of over-exposure to this product, if it occurs, local reddening, tissue swelling, and discomfort may result. HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms. ACUTE: Contact with this solution may cause irritation of the eyes, skin, mucous membranes, and any other exposed tissue. If inhaled, irritation of the respiratory system may occur, with coughing, and breathing difficulty. CHRONIC: Repeated skin contact with this product may result in dermatitis (inflammation and reddening of the skin). Prolonged or repeated exposure may cause liver and kidney damage.