MiraPrime MP Part A

Hazard statements (CLP)

H226, H303, H315, H317, H319, H333, H335, H411

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Skin irritation – Category 2 Eye irritation – Category 2A Skin sensitization – Category 1 Flammable Liquid and Vapor – Category 3 Acute aquatic toxicity – Category 2 Chronic aquatic toxicity – Category 2

Signal word

Specific target organ toxicity (single exposure) – Category 3 (Respiratory tract irritation)

Hazard statements

H315: Causes skin irritation H303: May be harmful if swallowed H317: May cause an allergic skin reaction H335: May cause respiratory irritation H319: Causes serious eye irritation H411: Toxic to aquatic life with long lasting effects H226: Flammable liquid and Vapor H333: May be harmful if inhaled

Precautionary statements

P261: Avoid breathing dust/fume/gas/mist/vapors/spray P264: Wash skin thoroughly after handling. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection P302+P352 IF ON SKIN Wash with plenty of soap and water P305+P351+P338 IF IN EYES rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs Get medical advice/attention P337+P313 If eye irritation persists Get medical advice/attention P362: Take off contaminated clothing and wash before reuse. P501: Dispose of contents and container in accordance with all local, regional, national and international regulations. HMIS-RATINGS (SCALE 0 – 4) HEALTH 2

NFPA Ratings

Health = 2 2 FLAMMABILITY 2 Fire = 2 2 TM 0 Reactivity = 0 REACTIVITY 0 TM Bondcoat Part A (0563,0565,0567), SDS MiraPrime MP Part A (7565), SDS EMERGENCY OVERVIEW: Warning! May cause allergic skin reactions. May cause irritation. Contains combustible material. In the event of fire or spill, adequate precautions must be taken. If involved in a fire, this product may decompose to produce toxic or irritating combustion products and a variety of other compounds (i.e. carbon monoxide, carbon dioxide and aldehydes). Emergency responders must wear the proper personal protective equipment suitable for the situation to which the are responding. For Routine Industrial Applications SYMPTOMS OF OVER-EXPOSURE BY ROUTE OF EXPOSURE: The most significant route of occupational overexposure is contact with skin. The symptoms of overexposure to this product are as follows: INHALATION: If mists or sprays of this solution are inhaled, this product may cause pulmonary irritation, irritation of the mucus membranes., and coughing. CONTACT WITH SKIN or EYES: Contact with the eyes may cause slight transient (temporary) eye irritation. Corneal injury is unlikely. Prolonged or repeated skin contact may dry the skin. Symptoms may include redness, drying and cracking of skin. Additional symptoms of skin contact may include: allergic skin reaction (delayed skin rash which may be followed by blistering, scaling and other skin effects), and numbness. INGESTION: Though ingestion is not anticipated to be a significant route of over-exposure to this product, if ingestion does occur, irritation of the mouth, throat, esophagus, and other tissues of the digestive system may occur upon contact. INJECTION: Though injection is not anticipated to be a significant route of over-exposure to this product, if it occurs, local reddening, tissue swelling, and discomfort may result. HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms. ACUTE: Contact with this solution may cause irritation of the eyes, skin, mucous membranes, and any other exposed tissue. If inhaled, irritation of the respiratory system may occur, with coughing, and breathing difficulty CHRONIC: Repeated skin contact with this product may result in dermatitis (inflammation and reddening of the skin).