Technical Grade 3-36 Multi-Purpose Precision Lubricant

Hazard statements (CLP)

H222, H229, H280, H304, H401

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Physical hazards

Flammable aerosols Category 1 Gases under pressure Compressed gas

Health hazards

Aspiration hazard Category 1

Environmental hazards

Hazardous to the aquatic environment, Category 2

Signal word

Danger

Hazard statements

Extremely flammable aerosol. Contains gas under pressure; may explode if heated. May be fatal if swallowed and enters airways. Toxic to aquatic life.

Prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not apply while equipment is energized. Extinguish all flames, pilot lights and heaters. Vapors will accumulate readily and may ignite. Use only with adequate ventilation; maintain ventilation during use and until all vapors are gone. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Avoid release to the environment.

Response

If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting.

Storage

Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Exposure to high temperature may cause can to burst.

Disposal

Dispose of contents/container in accordance with local/regional/national regulations. Hazard(s) not otherwise None known. classified (HNOC)

2.1 Classification of the substance or mixture

Category 1 Environmental hazards Hazardous to the aquatic environment, Category 2 long-term hazard OSHA defined hazards Not classified.