Urethane Isolation Aerosol

Hazard statements (CLP)

H222, H229, H315, H336, H372, H412

Code

Statements

H222

Extremely flammable aerosol

CLP CLASSIFICATION

Physical: Aerosols, category 1 Extremely flammable aerosol. Pressurised container: May burst if heated. Classification is based on test data. Health: Skin irritation, category 2 Causes skin irritation. Specific target organ toxicity - single exposure, category 3 May cause drowsiness or dizziness. Specific Target Organ Toxicity - Repeated Exposure Category 2 Causes damage to organs through prolonged or repeated exposure. Classification based on calculation method.

Environmental hazards

Hazardous to the aquatic environment, chronic category 3 Harmful to aquatic life with long lasting effects. Classification based on calculation method.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008

Contains

Stoddard solvent; Low boiling point naphtha - unspecified

Signal word

Danger

Hazard statements

H222 : Extremely flammable aerosol. H229 Pressurised container May burst if heated H315 : Causes skin irritation. H336 : May cause drowsiness or dizziness. H372 : Causes damage to organs through prolonged or repeated exposure. H412 : Harmful to aquatic life with long lasting effects.

Precautionary statements

P102 : Keep out of reach of children. P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 : Do not spray on an open flame or other ignition source. P251 : Do not pierce or burn, even after use. P260 : Do not breathe dust/fume/gas/mist/vapours/spray. P271 : Use only outdoors or in a well-ventilated area. P314 : Get medical advice/attention if you feel unwell. P410/412 : Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. P501-2 : Dispose of contents/container to an authorised waste collection point.

Supplemental label elements

None information:

2.3 Other hazards

No information available