POLYURETHANE FOAM Aerosol

CRC Industries Europe bvba

Revision date : 2012-01-19

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

287-477-0/85535-85-9

Name of the chemical

Alkanes, C14-17, chloro

Concentration

10-25

EC/CAS

200-857-2/75-28-5

Name of the chemical

iso-Butan, enthält  0,1% Butadien

Concentration

115-10- 204-065- 5-10

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

N/A

General Information

Revision date

2012-01-19

Product name

POLYURETHANE FOAM Aerosol

1.2.1 Relevant identified uses

Sealants and Isolation

Icons in SDS

Company Information

company name

CRC Industries Europe bvba

e-mail address of the competent person responsible for the Safety Data Sheet

hse@crcind.com

Section 2

Classification (DPD)

Health: R40: Limited evidence of a carcinogenic effect. R42/43: May cause sensitization by inhalation and skin contact. R48/20 Harmful danger of serious damage to health by prolonged exposure through inhalation. R20: Harmful by inhalation. R36/37/38: Irritating to eyes, respiratory system and skin. R64: May cause harm to breastfed babies. Physical: EXTREMELY FLAMMABLE

Environmental hazards

not classified

Contains

diphenylmethandiisocyanate, isomeres and homologues Warning symbol(s) : EXTREMELY FLAMMABLE Xn : HARMFUL

Hazard statements

R40: Limited evidence of a carcinogenic effect. R42/43: May cause sensitization by inhalation and skin contact. R48/20 Harmful danger of serious damage to health by prolonged exposure through inhalation. R20: Harmful by inhalation. R36/37/38: Irritating to eyes, respiratory system and skin. R64: May cause harm to breastfed babies.

Precautionary statements

S2: Keep out of the reach of children. S16: Keep away from sources of ignition - No smoking. S23: Do not breathe vapours/spray. S24/25: Avoid contact with skin and eyes. S33: Take precautionary measures against static discharges. S36/37: Wear suitable protective clothing and gloves. S45: In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S51: Use only in well-ventilated areas. Special labelling provisions: Contains isocyanates. See information supplied by the manufacturer. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. Extra label elements according Pressurised container: protect from sunlight and do not expose to temperatures to Aerosol Dispenser Directive exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a 75/324/EC: naked flame or any incandescent material. Without adequate ventilation formation of explosive mixtures may be possible.

2.3 Other hazards

Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.