Note: Ingredients listed on restricted chemical lists
EC/CAS
111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
N/A
EC/CAS
80-05-7
Name of the chemical
4,4'-isopropylidenediphenol
Concentration
N/A
General Information
Revision date
2010-08-17
Product name
PENNTROWEL WATER
1.2.1 Relevant identified uses
Hardener component for water cleanable Region grout system
Icons in SDS
Company Information
company name
Corrosion Engineering
GHS Information
Signal word
DANGER!
Section 2
SECTION 2: Hazards identification
This material is considered hazardous by the OSHA Hazard Communication Standard ( 29 CFR 1910. 1200 ) EMERGENCY OVERVIEW HMIS: Not established for this product Physical state: Light medium viscosity liquid HEALTH: Color: Clear FLAMMABILITY: Odor: Slight amine odor
Physical hazards
Personal Protection: See MSDS section 8 0=Minimal 1=Slight 2=Moderate 3=Serious 4=Severe
Health hazards
DANGER! CAUSES EYE AND SKIN BURNS. MAY CAUSE BLINDNESS. MAY BE HARMFUL IF ABSORBED THROUGH THE SKIN. MAY CAUSE ALLERGIC RESPIRATORY REACTION. MAY CAUSE ALLERGIC SKIN REACTION. MAY BE HARMFUL IF SWALLOWED.
Principle Routes of Exposure
Skin contact and inhalation.
Potential health effects
Inhalation: Overexposure to vapor or mist may be irritating to the respiratory tract and repeated or prolonged exposure can cause an allergic respiratory tract reaction in susceptible individuals. Skin contact: Repeated or prolonged skin contact can result in an allergic skin reaction. This material is considered, on the basis of single exposure (acute) animal tests, to be moderately to slightly toxic if absorbed through skin and corrosive to eyes and skin. Eye contact: Overexposure to vapor or mist may be irritating to the eyes. Ingestion: While swallowing of this material is unlikely in the industrial setting, if swallowed this material may cause burns of the mouth, throat and digestive tract. This material is considered, on the basis of single exposure (acute) animal tests, to be slightly toxic if ingested. Existing conditions aggravated by exposure: Workers with lung disease or reduced lung capacity should have limited exposure to this material. This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). See Section 11 for additional toxicological information. ID(s): 50224 Henkel Corrosion Engineering Rev. 3.000 8/17/10 1 of 7