Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
>= 85 %
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
<=10%
EC/CAS
231-175-3/7440-66-6
Name of the chemical
Zinc ()
Concentration
<= 10 %
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
<=2%
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium‡
Concentration
<=1%
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
<=1%
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
<1%
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
<0.1%
Listed in
General Information
Version
4
Revision date
2020-01-13
Product name
Aluminium Metal Alloy with Lithium > 1%
Product name
Aluminium Metal Alloy with Lithium > 1%
Identification on the label/Trade name
Aluminium ingots, aluminium billets, aluminium slabs, coils, extruded products
1.2.1 Relevant identified uses
Industrial use. Uses of substances as such or in preparations at industrial sites
Emergency telephone
Call national emergency number or 112 for Europe or 911 for North America
Icons in SDS
Company Information
company name
Constellium International
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H315, H319
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage.
H315
Causes skin irritation
H319
Causes serious eye irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
With more than 1% Lithium Hazard Class and Category Code Regulation EC
Potential health effects
Skin Irritation. Cat 2 - Causes skin irritation. NB! With > 5% Li: Cat 1B Eye Irritation. Cat 2 - Causes serious eyes damage/eye irritation
Environmental effects
Aluminium Lithium alloys do not need an environmental classification
2.2 Label elements
Labelling according to Regulation EC
Hazard pictograms
GHS07
Signal word
Warning
Hazard statements
H315 Causes skin irritation. NB! With > 5% Li H314 Cause severe skin burn and eye damage H319: Causes serious eyes damage/eye irritation
Precautionary statements
General N.B.: In the CLP Regulation, 1.3.4.1. Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label according to this Annex (see CLP), if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the criteria of this Annex (see CLP). 1.3.4.2. Instead, the supplier shall provide the information to downstream users or distributors by means of the SDS.
Prevention
P261 Avoid breathing dust/fume. P262 Do not get in eyes, on skin, or on clothing P264 Wash hands thoroughly after handling P270 - Do not eat, drink or smoke when using this product. P280 Wear protective gloves/eye protection P284 Wear respiratory protection in case of trouble P302 + P352 If on skin: Wash with plenty of soap and water P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332 + P313 If skin irritation occurs: Get medical advice/attention P362 Take off contaminated clothing and wash before reuse
Response
See sections 4 and 5.
2.3 Other hazards
The substance does not meet the criteria for a PBT or vPvB substance. Does not pose any health hazard under normal conditions of use and as delivered. Fines particles from processing (grinding, cutting, polishing and welding) may be readily ignitable, or create an explosive atmosphere and needs to be controlled. Fine particles in contact with water or humidity in air may release flammable gases in hazardous quantities, and may in some cases set off thermal reactions in contact with iron oxide and certain other metal oxides. For liquid aluminium, there is a risk of explosions if in contact with water, and reacts violently in contact with rust, oxides of some other metals or nitrate. When Al-Li alloys are heated to elevated temperatures (>260°C), surface oxidation occurs and irritating lithium hydroxide is formed.