PRIME LOCK PLUS INTERIOR ALKYD PRIMER SEALER

SECTION 2: Hazards identification

Emergency Overview DANGER Flammable. Vapors may cause flash fire. Harmful if swallowed. Vapor harmful. Vapors may be irritating to eyes, nose, throat, and lungs. May cause skin irritation and/or dermatitis. Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Appearance liquid Odor solvent

Principle Routes of Exposure

Eye contact, skin contact and inhalation. Acute Effects Eyes Avoid contact with eyes. Contact with eyes may cause irritation. Vapor may cause irritation with symptoms of burning and tearing. Skin Avoid contact with skin. May cause skin irritation and/or dermatitis. Can be absorbed through skin. Repeated or prolonged skin contact may cause allergic reactions with susceptible persons. Inhalation Avoid breathing vapors or mists. May cause irritation of respiratory tract. High vapor / aerosol concentrations are irritating to the eyes, nose, throat and lungs and may cause headaches, dizziness, drowsiness, unconsciousness, and other central nervous system effects. Ingestion Harmful if swallowed. Ingestion may cause irritation to mucous membranes. Small amounts of this product aspirated into the respiratory system during ingestion or vomiting may cause mild to severe pulmonary injury, possibly progressing to death.

Potential chronic health

Avoid repeated exposure. Prolonged exposure may cause chronic effects. See Section 11 for additional Toxicological information.

Medical Conditions Generally Aggravated by Exposure

Skin disorders. Asthma and other respiratory disorders. Liver disorders. Kidney disorders. HMIS Health: 1* Flammability: 3 Reactivity: 0 PPE: - HMIS Legend 0 - Minimal Hazard 1 - Slight Hazard 2 - Moderate Hazard 3 - Serious Hazard 4 - Severe Hazard * - Chronic Hazard X - Consult your supervisor or S.O.P. for "Special" handling instructions. Note: The PPE rating has intentionally been left blank. Choose appropriate PPE that will protect employees from the hazards the material will present under the actual normal conditions of use. Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer, has chosen to provide them. HMIS® ratings are to be used only in conjunction with a fully implemented HMIS® program by workers who have received appropriate HMIS® training. HMIS® is a registered trade and service mark of the NPCA. HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.