Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10
EC/CAS
64741-88-4
Name of the chemical
Distillates (petroleum), solvent-refined heavy paraffinic, if they contain > 3 % w/w DMSO extract
Concentration
1-5
General Information
Version
8
Revision date
2026-02-17
Product name
ENNIS PINT TERMO AASHTO BCO EXT
1.2.1 Relevant identified uses
Professional applications
Manufacturer Name
Comex Industrial Coatings S.A. de C.V
Icons in SDS
Company Information
company name
Comex Industrial Coatings S.A. de C.V
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H319, H351
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
30.4% (oral), 75.7% (dermal), 48.6% (inhalation)
Signal word
Warning
Hazard statements
May cause an allergic skin reaction. Causes serious eye irritation. Suspected of causing cancer. May form combustible dust concentrations in air.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Avoid breathing dust or mist. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF exposed or concerned Get medical advice or attention. IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Keep container tightly closed. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Prevent dust accumulation. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. Hazards identified when used : Avoid all contact with molten thermoplastic. When hot, thermoplastic material liquifies, becomes very tacky and will adhere to anything it touches. Molten thermoplastic can cause third degree burns if it comes in contact with skin. For thermal skin burns, immediately flush the area with plenty of cold water and seek immediate medical attention. Remove contaminated clothing only if not adhering to skin. If clothing or molten thermoplastic material is adhering to skin, do not attempt to remove. Removal could result in severe tissue damage. For thermal eye burns, immediately flush eye with plenty of cold water. Do not attempt to remove contact lenses. Cover eye with sterile dressing and seek immediate medical attention.
2.3 Other hazards
Fine dust clouds may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat. Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classification of the substance or mixture
EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1 CARCINOGENICITY - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 30.4% (oral), 75.7% (dermal), 48.6% (inhalation)
