Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥10-≤20
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
≥1.0-≤5.0
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
≥1.0-≤5.0
General Information
Version
4
Revision date
2026-04-29
Product name
CHALKBOARD BASE
1.2.1 Relevant identified uses
Consumer applications
Manufacturer Name
Comex Industrial Coatings S.A. de C.V
Icons in SDS
Company Information
company name
Comex Industrial Coatings S.A. de C.V
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H316, H350, H372
Hazard statements
Code
Statements
H316
Causes mild skin irritation
Section 2
SECTION 2: Hazards identification
Classification of the SKIN IRRITATION - Category 3 substance or mixture CARCINOGENICITY - Category 1A SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity 36.1% (oral), 36.1% (dermal), 30.4% (inhalation)
Signal word
Danger
Hazard statements
H316 - Causes mild skin irritation. H350 - May cause cancer. H372 - Causes damage to organs through prolonged or repeated exposure.
Precautionary statements
General P103 - Read label before use. P102 - Keep out of reach of children. P101 - If medical advice is needed, have product container or label at hand.
Prevention
P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P280 - Wear protective gloves, protective clothing and eye or face protection. P260 - Do not breathe vapor. P270 - Do not eat, drink or smoke when using this product. P264 - Wash thoroughly after handling.
Response
P308 + P313 - IF exposed or concerned: Get medical advice or attention. P332 + P313 - If skin irritation occurs: Get medical advice or attention.
Storage
P405 - Store locked up.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Emits toxic fumes when heated.
Supplemental label elements
Photosensitive agents In case of accidental eye contact, avoid direct exposure to elements (First aid the sun or other sources of UV light as severe irritation including burns may result. measures): These reactions can be delayed – get medical attention if pain, irritation or blistering occurs after contact. In case of accidental skin contact, avoid direct exposure to the sun or other sources of UV light as severe irritation including burns may result. These reactions can be delayed – get medical attention if pain, irritation, rash or blistering occurs after contact. See toxicological information (Section 11)
2.1 Classification of the substance or mixture
SKIN IRRITATION - Category 3 substance or mixture CARCINOGENICITY - Category 1A SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 36.1% (oral), 36.1% (dermal), 30.4% (inhalation)