Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
98% <10%
General Information
Revision date
2020-06-01
Product name
PureBond pMDI Composite Core; PureBond brand name when
Product Synonyms
NAF or FF PB, NAF or FF MDF, combination panel or combi
Icons in SDS
Company Information
company name
Columbia Forest Products
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
OSHA HCS 2012 Classification of the Substance Or Mixture United States (US)
Hazard pictograms
GHS07 GHS08
Signal word
Danger
Hazard statements
Causes skin irritation Causes eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May cause cancer via inhalation of respirable dust May cause respiratory irritation May cause damage to organs through prolonged or repeated exposure May form combustible dust concentrations in air
Prevention
Take precautionary measures against static discharge. Avoid breathing dust. Take off contaminated clothing and wash before reuse. In case of inadequate ventilation wear an approved respirator suitable for conditions of use. Do not eat, drink or smoke when manufacturing or installing this product.
Response
IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms, following removal to fresh air, call a Doctor or other qualified medical professional. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs get medical advice/attention. If In Eyes: Rinse cautiously for several minutes. Remove contact lenses if present and easy to do so. If eye irritation persists, get medical advice
Storage
Store away from incompatible materials.
Disposal
Dispose of waste and residues in accordance with local authority requirements.
2.1 Classification of the substance or mixture
United States (US) Classification according to OSHA 29 CFR 1910.1200 HCS This product is generally an article but is regulated under OSHA for the release of wood dust during mechanical operations releasing dust. The classifications below are based upon wood dust and pMDI component. Skin Irritation Category 2 Eye Irritation Category 2B Respiratory Sensitization Category 1 Skin Sensitization Category 1 Carcinogen Category 1A Specific Target Organ Toxicity Single Exposure Category 3: Respiratory Tract Irritation Specific Target Organ Toxicity Repeated Exposure Category 2 Other Classifications: Combustible Dust (OSHA Defined Hazard) If converted to small particles during further processing, handling, or by other means, may form combustible dust concentrations in air. Contains isocyanates. See information supplied by manufacture.