Note: Ingredients listed on restricted chemical lists
EC/CAS
212-782-2/868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
30-<35% 607-124-
EC/CAS
200-578-6/64-17-5
Name of the chemical
Ethanol
Concentration
25-<30%
EC/CAS
202-327-6/94-36-0
Name of the chemical
Dibenzoyl peroxide
Concentration
1-<5%
General Information
Version
2.1
Revision date
2020-05-25
Product name
ParaBond Adhesive A
1.2.1 Relevant identified uses
for dental use only
supplier name
Henry Schein Halas
Manufacturer Name
COLTENE/Whaledent AG
Icons in SDS
Company Information
company name
COLTENE/Whaledent AG
e-mail address of the competent person responsible for the Safety Data Sheet
info.ch@coltene.com, msds@coltene.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard categories
Flammable liquid: Flam. Liq. 2 Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2 Respiratory or skin sensitisation: Skin Sens. 1 Specific target organ toxicity - single exposure: STOT SE 3 Hazard Statements Highly flammable liquid and vapour Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause respiratory irritation Australia - This product is hazardous in accordance with WHS and dangerous as per ADG Code
Hazardous Ingredients
2-hydroxyethyl methacrylate dibenzoyl peroxide; benzoyl peroxide
Signal word
Danger
Hazard statements
Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation.
Precautionary statements
Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Supplemental label elements
Medical devices as defined in Directive 93/42/EEC and which are invasive or used in direct physical contact with the
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008 Hazard categories: Flammable liquid: Flam. Liq. 2 Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2 Respiratory or skin sensitisation: Skin Sens. 1 Specific target organ toxicity - single exposure: STOT SE 3 Hazard Statements: Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause respiratory irritation. Australia - This product is hazardous in accordance with WHS and dangerous as per ADG Code.
