General Information
Product name
COLT High Temperature Plus Sealing Compound
supplier name
COLT Repair Systems, Ltd
Manufacturer Name
COLT Repair Systems, Ltd
Icons in SDS
Company Information
company name
COLT Repair Systems, Ltd
Section 2
SECTION 2: Hazards identification
Low hazard product, may cause slight temporary irritation to the system, may cause slight skin irritation if contact is frequent or prolonged. A. During application : Due to the semi-cured state of the compound, it does not pose any appreciable health risk. However, eye protection should be worn, and as minute amounts of decomposition vapors are given off during exposure to high temperature, the working area should be well ventilated. B. During compound removal, prior to rejointing (after cured) : Compound should be removed by chipping off with a sharpened blade and the joint face cleaned with an abrasive cloth. Eye protection should be worn. The use of heat in removal should not be necessary, however, if used, depending on the degree of the initial cure, a small amount of fume may be given off. Therefore the work area should be well ventilated.
