Wearcoat 481HP Clear Part A

Coatings For Industry, Inc

Revision date : 2016-03-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

15625-89-5

Name of the chemical

2-ethyl-2-[[(1-oxoallyl)oxy]methyl]-1,3-propanediyl diacrylate; 2,2-bis(acryloyloxymethyl)butyl acrylate; trimethylolpropane triacrylate

Concentration

N/A

General Information

Revision date

2016-03-06

Product name

Wearcoat 481HP Clear Part A

1.2.1 Relevant identified uses

Epoxy floor coating

supplier name

Coatings For Industry, Inc

Icons in SDS

Company Information

company name

Coatings For Industry, Inc

e-mail address of the competent person responsible for the Safety Data Sheet

cs@cficoatings.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H302, H312, H315, H317, H318, H332, H402

Hazard statements

Code

Statements

H302

Harmful if swallowed

Section 2

OSHA HCS Classification

Health, Serious Eye Damage/Eye Irritation, 1 Health, Skin sensitization, 1 Health, Skin corrosion/irritation, 2 Health, Acute toxicity, 4 Dermal Health, Acute toxicity, 4 Inhalation Health, Acute toxicity, 4 Oral Environmental, Hazards to the aquatic environment - Acute, 3

Signal word

DANGER

Hazard statements

H318 - Causes serious eye damage H317 - May cause an allergic skin reaction H315 - Causes skin irritation H312 - Harmful in contact with skin H332 - Harmful if inhaled H302 - Harmful if swallowed H402 - Harmful to aquatic life

Precautionary statements

P261 - Avoid breathing dust/fume/gas/mist/vapors/spray. P264 - Wash _ thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P301+312 - IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P302+352 - IF ON SKIN: Wash with soap and water. P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P312 - Call a POISON CENTER or doctor/physician if you feel unwell. P330 - Rinse mouth. P332+313 - If skin irritation occurs: Get medical advice/attention. P362 - Take off contaminated clothing and wash before reuse. P501 - Dispose of contents/container in compliance with all Federal, State/Provincial and local laws

Principle Routes of Exposure

Skin contact, and Eye contact. Target Organs: Eyes, skin , respiratory system Inhalation: The low vapor pressure of the resin makes inhalation unlikely in normal use. Skin Contact: - Moderate irritant. Contact at elevated temperatures can cause thermal burns. May cause skin sensitization (rashes, hives). Prolonged skin contact is unlikely to result in absorption of harmful amounts. Eye Contact: Moderate to severe irritant. Contact at elevated temperatures can cause thermal burns.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.