PB Fast Set One Part Bonding Adhesive

SECTION 2: Hazards identification

Emergency Overview Contains dispenylmethane disocyanate (CAS No. 101-68-8) Inhalation MDI mists or vapors may cause respiratory irritation, breathlessness, chest discomfort, and reduced pulmonary function. Overexposure well above the PEL may result in bronchitis, bronchial spasms, and pulmonary edema. Long-term exposure to isocyanates has been reported to cause lung damage, including reduced lung function, which may be permanent. Acute or chronic overexposure to isocyanates may cause sensitization in some individuals resulting in allergic respiratory reactions including wheezing, shortness of breath and difficulty breathing.

Principle Routes of Exposure

Routes of entry for solids and liquids include eye and skin contact, ingestion, and inhalation. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route of entry for liquified gases. Acute Toxicity: Information on MDI Inhalation of MDI vapors may cause irritation of the mucous membranes of the nose, throat or trachea, breathlessness, chest discomfort, difficult breathing, and reduced function. Air-borne overexposure well above the PEL may result additionally in eye irritation, headache, chemical bronchitis, asthma-like findings or pulmonary edema. Isocyanates have also been reported to cause hypersensitivity pneumonitis, which is characterized by flu-like symptoms, the onset of which may be delayed. Gastrointestinal symptoms include nausea, vomiting, and abdominal pain. Irritation: Information on Disocyanates Eye contact with isocyanates may result in conjuctival irritation and mild corneal opacity. Skin contact may result in dermatitis, either irritative or allergic. Repeated Dose Toxicity: Information on MDI Results from a lifetime inhalation study of rats indicate that MDI aerosol was carcinogenic at 6mg/m3, the highest dose tested. This is well above the recommended TLV of 5 ppb (0.05 6mg/m3) Only irritation was noted at the lower concentration of 0.2 and 1mg/m3. No birth defects or teratogenic effects were reported in a teratology study with rats exposed to 1, 4, and 12 mg/m3 polymeric MDI for 6 hr/day on days 6-15 gestation. Embryotoxicity was reported at the top dose in the presence of maternity toxicity. Information of Isocyanates As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization. (chemical asthma) which will cause them to react to a later exposure of isocyanate at levels well below the PEL/TLV. These symptoms, which include chest tightness, wheezing, coughing, shortness of breath, or asthmatic attack could be immediate or delayed up to several hours after exposure. Similar to many non-specific asthmatic responses, there are reports that once sensitized, an individual can experience these symptoms upon exposure to dust, cold air, or other irritants. The increased lung sensitivity can persist for weeks and in severe cases for several years. Chronic overexposure to isocyanates has been reported to cause lung damage, including a decrease in lung function, which may be permanent. Sensitization may be either temporary or permanent. Prolonged contact can cause reddening, swelling, rash, scaling, or blistering. In those who have developed a skin sensitization, these symptoms can develop as a result of contact with very small amounts of liquid material, or even as a result of vapor-only exposure.

Medical Conditions Generally Aggravated by Exposure

Overexposure The isocyanate component is a respiratory sensitizer. It may cause an allergic reaction leading to asthma like spasms of the bronchial tubes and difficulty in breathing. Person with history with respiratory disease or hypersensitivity should not be expose to the product. An animal study indicated that MDI may induce respiratory hypersensitivity following dermal exposure. Medical supervision of all employees who handle or come into contact with isocyanates is recommended. Pre-employment and periodic medical examinations with respiratory function tests (FEV,FVC as a minimum) are suggested. Persons with asthmatic conditions, chronic bronchitis, other chronic respiratory diseases, recurrent eczema or pulmonary sensitization should be excluded from working with isocyanates, further exposure is not recommended. Contact may aggravate pulmonary disorders.