General Information
Revision date
2015-10-16
Product name
ClearFloc AE0555
supplier name
ClearTech Industries Inc
Icons in SDS
Company Information
company name
ClearTech Industries Inc
Section 2
Hazardous Ingredients
OF MATERIAL Hazardous Approximate LD50 LC50 Ingredients C.A.S. Concentration Species & Route 2-propanol 67-63-0 60-100% 5045 mg/kg rat-oral 16000 ppm (4hr) rat-inh. Dimethylbenzene 1330-20-7 10-30% 4300 mg/kg rabbit-dermal 5000 ppm (4hr) rat-inh. Ethyl benzene 100-41-4 1-5% 3500mg/kg rat-oral 4000 ppm(4hr) rat-inhal SECTION III-PHYSICAL DATA FOR MATERIAL Physical State: Liquid Odour/Appearance: Colourless, water white liquid, alcohol odour Specific Gravity: 0.8 @ 15ºC Odour Threshold(p.p.m.): N/E Boiling Point: 82-137ºC Evaporation Rate: N/E Freezing Point: N/Av. Solubility in Water: Partly soluble % Volatile(by volume): 100% Vapour Pressure(mm)Hg: 33.0 mmHg @ 20ºC Vapour Density(Air=1): >1 Coefficient of Water/Oil Distribut: N/E pH N.Ap. SECTION IV-FIRE AND EXPLOSION HAZARD OF MATERIAL Flammability Yes/No Yes If yes under which conditions? Heat, Open flame, spark Auto Ignition Temperature N/E Means of Extinguishing: Dry chemical, Carbon dioxide, Alcohol - resistant foam. Flashpoint and Method: 11ºC TCC Hazardous Combustion Products: Carbon monoxide, carbon dioxide, hydrocarbon fumes & smoke Upper Flammable limit (%vol) 12 Lower Flammable Limit(% by volume): 1 Explosion Data: Sensitivity to Mech. Impact: Yes Sensitivity to Static Discharge: Electrical & mechanical equipment should be explosion proof and grounded. SECTION V-REACTIVITY DATA Chemical Stability Yes/No: Yes If NO under which conditions? N.Ap. Incompatibility to Other Substances Yes/No: Yes If so which ones? strong oxidizing compounds, Acetaldehyde, Acids, Chlorine. May react with aluminum equipment at temperature above 120ºF Reactivity and under what conditions? Normally stable but can become unstable at elevated temp. and pressure. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide produced on combustion. N/E: not established N.Ap.: not applicable N/Av.: not available Material Name/Identifier: Diesel Fuel Conditioner Stock No. 991/992/993/994/995/998 SECTION VI-TOXICOLOGICAL PROPERTIES OF PRODUCT
Principle Routes of Exposure
SKIN CONTACT -x-SKIN ABSORPTION -x-EYE CONTACT -x-INHALATION -x-INGESTION Effects of Acute Exposure: Eye, Skin irritation. May cause headache, dizziness, nausea, drowsiness and central nervous system depression. Effects of chronic exposure: High exposure to dimethylbenzene to some animal studies have been reported to cause health effects on developing embryo/fetus. These effects were often at levels toxic to mother. The significance of these findings to humans has not been determined. LD 50 of Product: N/E LC 50 of Product: N/E Irritancy of Product: skin and eye irritant Exposure Limits : IPA 400 ppm STEL (ACGIH) Sensitization of Product: N/Av. Xylene 150 ppm STEL, Ethyl benzene 100 ppm STEL Toxicologically Synergistic Materials: N/Av. --CARCINOGENICITY --REPRODUCTIVE EFFECTS --TERATOGENICITY --MUTAGENICITY None known Ethyl benzene is listed as possible carcinogenic by IARC. SECTION VII-PREVENTIVE MEASURES Personal Protective Equipment to be used: Gloves(specify): Nitrile, Viton, Chemical resistant gloves Eye(specify): safety glasses Respiratory(specify): Organic vapour mask Clothing: Not required in normal use Respiratory Protection: If used indoors or on a continuous basis, use of NIOSH approved respirator is recommended Engineering Control: If used indoors or on a continuous basis, maintain exposure limit by using adequate ventilation. Leak and Spill Procedure: Use non-reactive absorbent material and non sparking tools to contain spills. Incase of large spill use explosion proof and grounded equipments. Prevent from entering waterways. Waste Disposal: Dispose of at an approved waste disposal facility. Or as per municipal or provincial regulation. DSL Listing All ingredients in the product are listed in the inventory.
Storage
Requirements Keep in a cool, well ventilated place. Keep away from heat, spark and flame. Handling procedure & Equip. Use spark resistant tools and equipment for transfers. Keep away from children. Do not inhale or ingest.
ADG classification
991/992/993 : Consumer Commodity, 994/995/996/998 as follows: Flammable liquids, N.O.S. (2-propanol solution), Class 3, UN 1993, Pkg.Gr.II
WHMIS Classification
991/992/993/994 - Consumer Commodity, complies with CCCR 2001. #995/998 - Class B2, D2B & D2A SECTION VIII-FIRST AID MEASURES Eye: Flush with water for at least 15 minutes. Seek mediacl attention immediately. Skin: Wash with soap and water. See doctor if irritation persist. Inhalation: Move patient to fresh air and restore breathing if required. Call a physician if discomfort persist. Ingestion: DO NOT INDUCE VOMITING. Seek medical help immediately. SECTION IX-PREPARATION DATE OF M.S.D.S. Additional Info/Comments: Source used: Supplier's data Phone Number: (905) 793-4311 Prepared By: Quality Control Laboratory Date Prepared Janaury 2, 2015. Kleen-Flo Tumbler Industries Limited THIS SHEET SUPERSEDES ANY OTHER M.S.D.S. PREVIOUSLY PREPARED N/Av.: not available N/Ap.: not applicable