All Purpose Cleaner

SECTION 2: Hazards identification

Main Hazard: Irritant to the skin. Eye Contact: Irritating to eyes, avoid contact at all times. Skin Contact: Prolonged or repeated contact may dry the skin and cause irritation. Ingestion: Do not swallow. May cause gastrointestinal irritation. Inhalation: Over exposure may result in mucous membrane irritation. FIRST AID Eye Contact: Immediately flush opened eye with gently flowing water for at least 15 minutes. Get medical attention if irritation occurs. Skin Contact: Rinse with soap and water and rinse thoroughly. Inhalation: Supply fresh air. Essentially non-hazardous. Ingestion: Rinse mouth with water. Do not induce vomiting. Consult medical practitioner if large amounts are ingested. FIRE FIGHTING MEASURES Extinguishing Media: Non-flammable. Special Hazards: Absorb runoff with sand or similar material. Surrounding area may become slippery. Protective Clothing: Not pertinent. ACCIDENTAL RELEASE MEASURES Personal Precautions: Use appropriate protective clothing. Wear safety goggles, rubber / PVC gloves. Environmental Precautions: As per good environmental practices, prevent contamination of drains and waterways, with large quantities of undiluted product. Measures for cleaning up: Take up with absorbent material and dispose to local regulations. HANDLING AND STORAGE Handling: Avoid contact with eyes. Avoid prolonged contact with skin. Do not mix with other household chemicals. Storage: Store in a cool place, well ventilated area away from direct sunlight. Keep container tightly closed. KEEP OUT OF REACH OF CHILDREN EXPOSURE CONTROLS AND PERSONAL PROTECTION Precautionary Measures: Workers should have access to an eye wash bottle. Safety goggles should be worn if splashing may occur. Hygiene Measures: Do not eat, drink or smoke whilst working and wash hands before breaks and after work. Respiratory: No specific requirement. Hand Protection: Appropriate gloves should be worn to maintain adequate GMP standards. Eye Protection: Protective goggles or safety glasses. Other Protection: Not Applicable. PHYSICAL AND CHEMICAL PROPERTIES Appearance: White viscous liquid. Odour: Typical. Lemon Ph@25°C: 6.8 – 8.0 Relative density @ 25°C: Not determined. Viscosity @ 25°C: 6000 – 10 000 cPs (Brookfield Viscometer, Spindle 4 @ 10rpm) Flash point: Not available. STABILITY AND REACTIVITY Conditions to avoid: Do not mix with other household chemicals. Stability: The product is stable under normal conditions of use and storage.