Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
≥90
EC/CAS
72623-87-1
Name of the chemical
Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil, heavy vacuum gas oil and solvent deasphalted residual oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of approximately 32 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
≥10-≤25
EC/CAS
64742-56-9
Name of the chemical
Distillates (petroleum), solvent-dewaxed light paraffinic
Concentration
≤3
EC/CAS
64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
≤3
EC/CAS
64742-70-7
Name of the chemical
Paraffin oils (petroleum), catalytic dewaxed heavy; Base oil — unspecified (A complex combination of hydrocarbons obtained from a catalytic dewaxing process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of at least 19 10-6 m2.s-1 at 40 °C.)
Concentration
≤3
EC/CAS
113706-15-3
Name of the chemical
Phosphorodithioic acid, mixed O,O-bis(sec-butyl and isooctyl) esters, zinc salts
Concentration
≤3
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
<0.025
Listed in
General Information
Version
4
Revision date
2024-06-26
Product name
CITGO CITGARD 600 Heavy Duty Engine Oil, SAE 10W-30
Product Synonyms
Heavy duty motor oil
supplier name
CITGO Petroleum Corporation
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
CITGO Petroleum Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
sdsvend@citgo.com
GHS Information
Signal word
No signal word
Hazard Codes
Hazard statements (CLP)
H411
Hazard statements
Code
Statements
H411
Toxic to aquatic life with long lasting effects
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
AQUATIC HAZARD (LONG-TERM) - Category 2
Signal word
No signal word.
Hazard statements
Toxic to aquatic life with long lasting effects.
Precautionary statements
General : Keep out of reach of children.
Prevention
Avoid release to the environment. Do not get in eyes, on skin, or on clothing.
Response
Collect spillage. Wash with plenty of soap and water or use a recognized skin cleanser.
Storage
Store in accordance with all local, regional, national and international regulations. Store in a dry place and a closed container. Empty containers may contain material residues which can ignite with explosive force. Misuse of empty containers can be dangerous if used to store toxic, flammable, or reactive materials. Cutting or welding of empty containers can cause fire, explosion, or release of toxic fumes from residues. Do not pressurize or expose empty containers to open flame, sparks, or heat. Keep container closed and drum bungs in place. All label warnings and precautions must be observed. Return empty drums to a qualified reconditioner. Consult appropriate federal, state and local authorities before reusing, reconditioning, reclaiming, recycling, or disposing of empty containers and/or waste residues of this material.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations. Don't Pollute. Conserve Resources. Return used oil to collection centers.
2.3 Other hazards
None known.