Note: Ingredients listed on restricted chemical lists
EC/CAS
68609-97-2
Name of the chemical
Oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Concentration
N/A
General Information
Revision date
2020-08-12
Product name
ARC CS4(E) Part A
Emergency telephone
+49(0) 551 - 1 92 40 (GIZ-Nord, 24h
Icons in SDS
Company Information
company name
Chesterton International GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
eu-sds@chesterton.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Hazard categories
Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2 Respiratory or skin sensitisation: Skin Sens. 1 Hazardous to the aquatic environment: Aquatic Chronic 2
Hazard statements
Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long lasting effects. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects.
2.2 Label elements
Regulation (EC) No. 1272/2008
Hazardous Ingredients
Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol Phenol, polymer with formaldehyde, glycidether oxirane, mono[(C12-14-alkyloxy)methyl] derivs.
Signal word
Warning
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P302+P352 IF ON SKIN: Wash with plenty of water. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P391 Collect spillage. P501 Dispose of contents/container to an appropriate recycling or disposal facility.
2.3 Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B.
