Note: Ingredients listed on restricted chemical lists
EC/CAS
124-38-9
Name of the chemical
Carbon dioxide CO2
Concentration
N/A
General Information
Revision date
2017-11-02
Product name
Straight Cutting Fluid Aerosol
CAS No.
124-38-9
1.2.1 Relevant identified uses
Cutting oil spray
Icons in SDS
Company Information
company name
Chemtools Pty Ltd
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H280
Hazard statements
Code
Statements
H280
Contains gas under pressure; may explode if heated
Section 2
Hazard statements
This product is classified as: Hazardous according to the criteria of SWA. Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria. H280: Contains gas under pressure; may explode if heated.
SUSMP Classification
None allocated
ADG classification
Class 2.2 Non-flammable, non-toxic gases
UN Number
1950, AEROSOLS
Signal word
WARNING Gases under pressure - Compressed gas
Prevention
P262: Do not get in eyes, on skin, or on clothing. P271: Use only outdoors or in a well ventilated area. P281: Use personal protective equipment as required.
Response
P362: Take off contaminated clothing and wash before reuse. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P370+P378: In case of fire, use carbon dioxide, dry chemical, foam, water fog. Water fog or fine spray is the preferred medium for large fires.
Storage
P403: Store in a well-ventilated place. P410+P412: Store below 30°C, protect from direct sunlight and do not expose to temperatures exceeding 50°C.
Disposal
P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: Aerosol spray dispensing an amber oily liquid Odour: Mineral oil odour
Health hazards
no significant risk factors have been found for this product
