ChemTigTM Weld Torch Coolant

Hazard statements (CLP)

H226, H320

Code

Statements

H226

Flammable liquid and vapour

Hazard statements

This product is classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria. H226: Flammable liquid and vapour. H320: Causes eye irritation.

SUSMP Classification

None allocated

ADG classification

None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.

UN Number

None allocated Note: Although this product has a flash point of about 38°C, Special provision 144 in the Australian Dangerous Goods Code “An aqueous solution of not more than 24% alcohol by volume is not subject to this Code” applies. There are similar provisions in the IATA and IMDG/IMSBC codes.

Signal word

WARNING Flammable liquids Category 3 Eye irritation Category 2B

Prevention

P262: Do not get in eyes, on skin, or on clothing. P264: Wash contacted areas thoroughly after handling. P280: Wear protective gloves, protective clothing and eye or face protection. P281: Use personal protective equipment as required.

Response

P337 If eye irritation persists seek medical attention P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P337+P313 If eye irritation persists Get medical advice P370+P378: In case of fire, use carbon dioxide, dry chemical, foam, water fog.

Storage

P410: Protect from sunlight. P402+P404: Store in a dry place. Store in a closed container. P403+P235: Store in a well-ventilated place. Keep cool.

Disposal

P501: If product can not be recycled, consider controlled incineration, or contact a specialist waste disposal company (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: Clear, colourless liquid. Odour: Characteristic alcohol odour.

Health hazards

causes eye irritation