Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
20-50%
EC/CAS
39445-23-3
Name of the chemical
Calcium magnesium tetrahydroxide
Concentration
<5%
General Information
Revision date
2016-04-21
Product name
Microtopping NT (Interior)
1.2.1 Relevant identified uses
Cementitious Overlay
supplier name
ChemSystems, Inc.
Icons in SDS
Company Information
company name
ChemSystems, Inc.
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H303, H313, H333, H334
Hazard statements
Code
Statements
H303
May be harmful if swallowed
Section 2
SECTION 2: Hazards identification
Category 2 Skin Irritant Category 2B Serious Eye Damage/Eye Irritant Category 3 Specific Target Organ Acute Toxicity (respiratory system, central nervous system)
Signal word
Warning
Hazard statements
H333 - May be harmful if inhaled H313 - May be harmful in contact with skin H303 - May be harmful if swallowed H334 - May cause allergy or asthma symptoms of breathing difficulties if inhaled
Prevention
P264 - Wash thoroughly after handling P352 - Wash with soap and water Note: product may contain small traces of silica below 0.1% Use respiratory protection and hazard controls. Use particulate protection. Gloves and /or skin protection is recommended. Safety glasses or eye protection recommended. Emergency overview Immediate or delayed hazard Exposure of sufficient time to wet Portland cement directly on surface, OR on moist areas of the body to DRY powder cement, can cause serious skin or eye injuries in the form of chemical or caustic burns.
Health hazards
Not to be expected if handled and used properly Product contains a substance which may have chronic respiratory health hazards including cancer and silicosis. Handle with the proper hazard controls.
