Note: Ingredients listed on restricted chemical lists
EC/CAS
203-726-8/109-99-9
Name of the chemical
Tetrahydrofuran (618/2012)
Concentration
75 - < 90
General Information
Version
5.0
Revision date
2020-03-05
Product name
Isopropylmagnesium chloride (in THF)
Product Synonyms
B0087
REACH No
not
Emergency telephone
+49 (0)8223 / 9691 - 34
Icons in SDS
Company Information
company name
Chemische Fabrik Karl Bucher GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
sdb.bucher@cfkb.de
GHS Information
Signal word
danger
Hazard Codes
Hazard statements (CLP)
H225, H260, H314, H318, H335, H336, H351
Hazard statements
Code
Statements
H225
Highly flammable liquid and vapour
H260
In contact with water releases flammable gases which may ignite spontaneously
H314
Causes severe skin burns and eye damage.
H318
Causes serious eye damage.
H335
May cause respiratory irritation
H336
May cause drowsiness or dizziness
H351
Suspected of causing cancer
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No 1272/2008 [CLP Classification of the substance or mixture
Most important adverse effects
Skin corrosion produces an irreversible damage to the skin; namely, visible necrosis through the epidermis and into the dermis. The product is combustible and can be ignited by potential ignition sources. In contact with water releases flammable gases which may ignite spontaneously
Signal word
danger
Hazard pictograms
GHS02, GHS05, GHS07, GHS08
Hazard statements
H225 Highly flammable liquid and vapour. H260 In contact with water releases flammable gases which may ignite spontaneously. H314 Causes severe skin burns and eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H351 Suspected of causing cancer.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P231+P232 Handle and store contents under inert gas. Protect from moisture. P280 Wear protective gloves/protective clothing/eye protection/face protection. P281 Use personal protective equipment as required. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P335+P334 Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages. P370+P378 In case of fire: Use metal fire powder to extinguish - never use water. P403+P235 Store in a well-ventilated place. Keep cool.
Supplemental label elements
EUH014 Reacts violently with water. EUH019 May form explosive peroxides.
Hazardous Ingredients
Tetrahydrofuran, chloro(1-methylethyl)magnesium
2.3 Other hazards
See section 12.5 "results of PBT and vPvB assessment".
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 (CLP) Section Hazard class Category Hazard class and Hazard state- category ment 2.6 flammable liquid 2 Flam. Liq. 2 H225 2.12 substance and mixture which, in contact with water, emits flam- 1 Water-react. 1 H260 mable gas 3.2 skin corrosion/irritation 1B Skin Corr. 1B H314 3.3 serious eye damage/eye irritation 1 Eye Dam. 1 H318 3.6 carcinogenicity 2 Carc. 2 H351 3.8R specific target organ toxicity - single exposure (respiratory tract 3 STOT SE 3 H335 irritation) 3.8D specific target organ toxicity - single exposure (narcotic effects, 3 STOT SE 3 H336 drowsiness) For full text of abbreviations: see SECTION 16. The most important adverse physicochemical, human health and environmental effects Skin corrosion produces an irreversible damage to the skin; namely, visible necrosis through the epidermis and into the dermis. The product is combustible and can be ignited by potential ignition sources. In contact with water releases flammable gases which may ignite spontaneously.